c1 drafted · lead XGI 1500 250 DCG IOM DOCR-071081-DD
- XGI 1500 250 DCG IOM DOCR-071081-DD
tbl=19.r8h=3aba5cfd6070
Fault codes › Yaskawa Solectria › Yaskawa Solectria XGI 1500-DCG
Reports internal device fault; look at communication processor; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=19.r8 h=3aba5cfd6070The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead XGI 1500 250 DCG IOM DOCR-071081-DD
tbl=19.r8 h=3aba5cfd6070has_event_classc2 drafted · lead Warning (device continues, a condition is flagged)
from the table header
tbl=19.r8 h=3aba5cfd6070tbl=18 h=fc50119e7e7ereportsc3 drafted · lead Internal device fault
tbl=21.r8 h=3aba5cfd6070tbl=18.r8 h=3aba5cfd6070tbl=19.r8 h=3aba5cfd6070review note: support check: partial - Communication processor initialization fault implies an internal fault, but 'internal device fault' is not explicitly stated.
affectsc4 drafted · lead Communication processor
tbl=21.r8 h=3aba5cfd6070tbl=18.r8 h=3aba5cfd6070tbl=19.r8 h=3aba5cfd6070mitigated_byc5 drafted · lead Inverter restart
tbl=21.r8 h=3aba5cfd6070tbl=18.r8 h=3aba5cfd6070tbl=19.r8 h=3aba5cfd6070has_production_effectc6 drafted · lead Trip (production stops)
tbl=21.r8 h=3aba5cfd6070sec=9.1.2 h=03d6c2913989has_recoveryc7 drafted · lead Manual reset (operator restarts or acknowledges)
Power cycle first; contact service if the error persists.
tbl=21.r8 h=3aba5cfd6070tbl=18.r8 h=3aba5cfd6070tbl=19.r8 h=3aba5cfd6070review note: support check: partial - Power cycle is an operator action, but the row doesn't say the warning clears that way; the general text says…
applies_toc8 drafted · lead Solectria XGI 1500-DCG
tbl=19.r8 h=3aba5cfd6070