c1 drafted · lead FIMER UNO-DM-6.0-TL-PLUS-US-Q Product Manual RevB
- FIMER UNO-DM-6.0-TL-PLUS-US-Q Product Manual RevB
tbl=37.r2h=d9aad457032a
Fault codes › ABB / FIMER › UNO-DM-6.0-TL-PLUS-US
Reports internal device fault; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=37.r2 h=d9aad457032atbl=48.r4 h=8f2d95491d5aThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead FIMER UNO-DM-6.0-TL-PLUS-US-Q Product Manual RevB
tbl=37.r2 h=d9aad457032ac2 drafted · lead UNO-DM-6.0-TL-PLUS-US Product Manual RevA
tbl=48.r4 h=8f2d95491d5ahas_event_classc3 drafted · lead Fault (device stops or needs intervention)
from the code prefix
tbl=37.r2 h=d9aad457032atbl=48.r4 h=8f2d95491d5areportsc4 drafted · lead Internal device fault
tbl=53.r4 h=24bdba9f84a8tbl=46.r6 h=102602a1fc91tbl=39.r2 h=d9aad457032atbl=48.r4 h=8f2d95491d5atbl=37.r8 h=8dd0d5c5b1d5mitigated_byc5 drafted · lead Inverter restart
tbl=53.r4 h=24bdba9f84a8tbl=46.r6 h=102602a1fc91tbl=39.r2 h=d9aad457032atbl=48.r4 h=8f2d95491d5atbl=37.r8 h=8dd0d5c5b1d5review note: support check: partial - Switching off and on is a step before contacting assistance; the passages do not say it resolves the error.
has_recoveryc6 verified · fact Manual reset (operator restarts or acknowledges)
Power cycle first; contact service if the error persists.
tbl=53.r4 h=24bdba9f84a8tbl=46.r6 h=102602a1fc91tbl=39.r2 h=d9aad457032atbl=48.r4 h=8f2d95491d5atbl=37.r8 h=8dd0d5c5b1d5verified by: review-workflowverified on: 2026-10-23review note: support check: partial - A power cycle is listed, but the passages do not say a manual reset clears the error.
applies_toc7 drafted · lead UNO-DM-6.0-TL-PLUS-US string inverter
tbl=37.r2 h=d9aad457032atbl=48.r4 h=8f2d95491d5a