c1 drafted · lead Sungrow SG200HX-US User Manual
- Sungrow SG200HX-US User Manual
tbl=34.r4h=e8a871c21e3c - Sungrow SG200HX-US User Manual
tbl=35.r1h=b64052214890
Fault codes › Sungrow › Sungrow SG200HX-US
Reports internal device fault; do: inverter restart, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=34.r4 h=e8a871c21e3ctbl=35.r1 h=b64052214890The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead Sungrow SG200HX-US User Manual
tbl=34.r4 h=e8a871c21e3ctbl=35.r1 h=b64052214890reportsc2 drafted · lead Internal device fault
Generic system fault shared by many codes; the row names no specific failed part.
tbl=34.r4 h=e8a871c21e3ctbl=34.r2 h=b24b52972256review note: support check: partial - Codes 52-58 are a generic System Fault; internal device fault is only loosely implied.
has_event_classc3 drafted · lead Fault (device stops or needs intervention)
tbl=34.r4 h=e8a871c21e3csec=8.1 h=eca2a8959712has_recoveryc4 drafted · lead Auto-reset (clears by itself)
First step is to wait for normal operation; if it persists, power-cycle AC/DC after 15 minutes, then contact service.
tbl=34.r4 h=e8a871c21e3ctbl=34.r2 h=b24b52972256review note: support check: partial - First step is waiting for normal, but later steps need manual power cycle; auto-reset is not clearly stated.
mitigated_byc5 drafted · lead Inverter restart
Applies if the fault does not clear by itself.
tbl=34.r4 h=e8a871c21e3ctbl=34.r2 h=b24b52972256c6 drafted · lead Contact manufacturer service
Final step if the fault continues after restarting.
tbl=34.r4 h=e8a871c21e3ctbl=34.r2 h=b24b52972256applies_toc7 drafted · lead Sungrow SG200HX-US
tbl=34.r4 h=e8a871c21e3ctbl=35.r1 h=b64052214890