c1 drafted · lead XGI 1500 1MW IOM DOCR-071091-H
- XGI 1500 1MW IOM DOCR-071091-H
tbl=19.r7h=2731f0fff08f
Fault codes › Yaskawa Solectria › Yaskawa Solectria XGI 1500-1MW
Reports internal device fault; may indicate power stage fault; look at inverter bridge; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=19.r7 h=2731f0fff08fThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead XGI 1500 1MW IOM DOCR-071091-H
tbl=19.r7 h=2731f0fff08fhas_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the table header
tbl=19.r7 h=2731f0fff08ftbl=19 h=d43f92f17c78reportsc3 drafted · lead Internal device fault
tbl=17.r2 h=d2629351cf52tbl=19.r7 h=2731f0fff08findicatesc4 drafted · lead Power stage fault
tbl=17.r2 h=d2629351cf52tbl=19.r7 h=2731f0fff08faffectsc5 drafted · lead Inverter bridge
tbl=17.r2 h=d2629351cf52tbl=19.r7 h=2731f0fff08freview note: support check: partial - The failure is in the powertrain, but the inverter bridge is not named.
mitigated_byc6 drafted · lead Inverter restart
tbl=17.r2 h=d2629351cf52tbl=19.r7 h=2731f0fff08fhas_recoveryc7 drafted · lead Manual reset (operator restarts or acknowledges)
Power cycle first; technical support if error persists.
tbl=17.r2 h=d2629351cf52tbl=19.r7 h=2731f0fff08freview note: support check: partial - Power cycle then support is stated, but clearing by manual reset is only implied.
applies_toc8 drafted · lead Solectria XGI 1500-1MW
tbl=19.r7 h=2731f0fff08f