c1 drafted · lead CSI User Manual 125K-T600GL02-U NA V1.1 20210518
- CSI User Manual 125K-T600GL02-U NA V1.1 20210518
tbl=11.r2h=68bcd06b0203
Fault codes › Canadian Solar › CSI-125K-T600GL02-U
Reports internal device fault; look at digital signal processor; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=11.r2 h=68bcd06b0203The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CSI User Manual 125K-T600GL02-U NA V1.1 20210518
tbl=11.r2 h=68bcd06b0203reportsc2 verified · fact Internal device fault
Processor values disagree between master and slave controllers.
tbl=9.r2 h=4c094ee77fdaverified by: review-workflowverified on: 2026-10-23
affectsc3 drafted · lead Digital signal processor
tbl=9.r2 h=4c094ee77fdamitigated_byc4 drafted · lead Inverter restart
tbl=9.r2 h=4c094ee77fdahas_recoveryc5 drafted · lead Manual reset (operator restarts or acknowledges)
Power-cycle first; replace inverter if it persists.
tbl=9.r2 h=4c094ee77fdahas_event_classc6 drafted · lead Fault (device stops or needs intervention)
tbl=9.r2 h=4c094ee77fdatbl=8 h=b80e6cf9a87areview note: support check: partial - The table is titled 'Fault messages' and lists IN I-PRO, but the row itself doesn't state the device behavior; fault…
applies_toc7 drafted · lead CSI-125K-T600GL02-U
tbl=11.r2 h=68bcd06b0203