c1 drafted · lead CSI Installation Manual CSI-125KTL-GS-E USA V1.3
- CSI Installation Manual CSI-125KTL-GS-E USA V1.3
tbl=11.r2h=68bcd06b0203
Fault codes › Canadian Solar › CSI-125KTL-GS-E
Reports internal device fault; look at digital signal processor; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=11.r2 h=68bcd06b0203The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CSI Installation Manual CSI-125KTL-GS-E USA V1.3
tbl=11.r2 h=68bcd06b0203reportsc2 drafted · lead Internal device fault
Processor values disagree between master and slave controllers.
tbl=9.r2 h=4c094ee77fdaaffectsc3 drafted · lead Digital signal processor
tbl=9.r2 h=4c094ee77fdamitigated_byc4 drafted · lead Inverter restart
tbl=9.r2 h=4c094ee77fdahas_recoveryc5 drafted · lead Manual reset (operator restarts or acknowledges)
Power-cycle first; replace inverter if it persists.
tbl=9.r2 h=4c094ee77fdahas_event_classc6 drafted · lead Fault (device stops or needs intervention)
tbl=9.r2 h=4c094ee77fdatbl=8 h=b80e6cf9a87areview note: support check: partial - The table is titled 'Fault messages' and lists IN I-PRO, but the row itself doesn't state the device behavior; fault…
applies_toc7 drafted · lead CSI-125KTL-GS-E
tbl=11.r2 h=68bcd06b0203