c1 drafted · lead SBSExx-US-50-BE-en-11
- SBSExx-US-50-BE-en-11
sec=11.1.24h=c5caf3e147bd - SBSExx-US-50-BE-en-11
sec=h538h=7acd25259cf5
Fault codes › SMA › Sunny Boy Smart Energy 3.8-11.5-US (SBSEx.x-US-50)
Reports DC overvoltage; look at PV array; confirm with DC voltage measurement; do: string voltage margin design, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
sec=11.1.24 h=c5caf3e147bdsec=h538 h=7acd25259cf5The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead SBSExx-US-50-BE-en-11
sec=11.1.24 h=c5caf3e147bdsec=h538 h=7acd25259cf5reportsc2 drafted · lead DC overvoltage
sec=h258 h=33883a354598sec=h260 h=587cea85589bsec=h268 h=41676f7fb1bdsec=h269 h=f9c84c143221sec=h538 h=7acd25259cf5sec=h539 h=55dc6331d266review note: support check: partial - DC overvoltage is stated for the 3401–3412 group of codes, and 3402 is listed with them rather than in its…
affectssec=h258 h=33883a354598sec=h261 h=5bf6ccea6e5esec=h270 h=33b43893fe4dsec=h540 h=b3b29436b48ddetected_byc4 drafted · lead DC voltage measurement
sec=h258 h=33883a354598sec=h261 h=5bf6ccea6e5esec=h270 h=33b43893fe4dsec=h540 h=b3b29436b48dreview note: support check: partial - The passages check the DC voltage against the maximum input voltage but do not say it is detected by DC…
mitigated_byc5 drafted · lead String voltage margin design
When DC voltage exceeds the inverter maximum input voltage
sec=h258 h=33883a354598sec=h261 h=5bf6ccea6e5esec=h270 h=33b43893fe4dsec=h540 h=b3b29436b48dc6 drafted · lead Contact manufacturer service
Escalation if the message recurs frequently
sec=h258 h=33883a354598sec=h261 h=5bf6ccea6e5esec=h270 h=33b43893fe4dsec=h540 h=b3b29436b48dhas_event_classc7 drafted · lead Fault (device stops or needs intervention)
sec=h258 h=33883a354598sec=h260 h=587cea85589bsec=h261 h=5bf6ccea6e5esec=h269 h=f9c84c143221sec=h270 h=33b43893fe4dreview note: support check: partial - The messages warn of destruction risk and call for disconnection, which implies a fault, but the class is not stated.
has_recoveryc8 drafted · lead Manual reset (operator restarts or acknowledges)
Operator disconnects, verifies DC voltage and reconnects; service if frequent
sec=h258 h=33883a354598sec=h261 h=5bf6ccea6e5esec=h270 h=33b43893fe4dsec=h540 h=b3b29436b48dapplies_toc9 drafted · lead Sunny Boy Smart Energy US-50
sec=11.1.24 h=c5caf3e147bdsec=h538 h=7acd25259cf5