c1 drafted · lead UNO-DM-6.0-TL-PLUS-US Product Manual RevA
- UNO-DM-6.0-TL-PLUS-US Product Manual RevA
tbl=54.r2h=bfaaaaca05fb
Fault codes › ABB / FIMER › UNO-DM-6.0-TL-PLUS-US
Reports DC overvoltage; look at PV array; confirm with DC voltage measurement; do: string configuration correction, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=54.r2 h=bfaaaaca05fbThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead UNO-DM-6.0-TL-PLUS-US Product Manual RevA
tbl=54.r2 h=bfaaaaca05fbreportsc2 drafted · lead DC overvoltage
Some manuals label the input overvoltage as AC; the input voltage measurement points to the DC side
tbl=59.r2 h=bfaaaaca05fbtbl=54.r2 h=bfaaaaca05fbtbl=52.r2 h=ab0fd3beeef6tbl=43.r4 h=2ade33456befhas_event_classc3 drafted · lead Warning (device continues, a condition is flagged)
tbl=52.r2 h=ab0fd3beeef6tbl=59.r2 h=bfaaaaca05fbtbl=54.r2 h=bfaaaaca05fbtbl=43.r4 h=2ade33456befsec=h262 h=ff3e2268fa02review note: support check: partial - Power limitation with continued operation implies warning, but class isn't explicit.
has_production_effectc4 verified · fact Derate (output reduced or limited)
Limit percentage is variable; the 50 percent figure is only an example
tbl=52.r2 h=ab0fd3beeef6tbl=59.r2 h=bfaaaaca05fbtbl=54.r2 h=bfaaaaca05fbtbl=43.r4 h=2ade33456befverified by: review-workflowverified on: 2026-10-23
detected_byc5 drafted · lead DC voltage measurement
tbl=52.r2 h=ab0fd3beeef6tbl=59.r2 h=bfaaaaca05fbtbl=54.r2 h=bfaaaaca05fbtbl=43.r4 h=2ade33456befaffectstbl=52.r2 h=ab0fd3beeef6tbl=59.r2 h=bfaaaaca05fbtbl=54.r2 h=bfaaaaca05fbtbl=43.r4 h=2ade33456befmitigated_byc7 drafted · lead String configuration correction
When the measured input voltage is above the operating range maximum
tbl=52.r2 h=ab0fd3beeef6tbl=59.r2 h=bfaaaaca05fbtbl=54.r2 h=bfaaaaca05fbtbl=43.r4 h=2ade33456befreview note: support check: partial - Check PV generator configuration when voltage is above range is stated, but 'string configuration correction' is a slightly stronger action.
c8 drafted · lead Contact manufacturer service
When the measured voltage is within range, which points to an internal malfunction
tbl=52.r2 h=ab0fd3beeef6tbl=59.r2 h=bfaaaaca05fbtbl=54.r2 h=bfaaaaca05fbtbl=43.r4 h=2ade33456befapplies_toc9 drafted · lead UNO-DM-6.0-TL-PLUS-US string inverter
tbl=54.r2 h=bfaaaaca05fb