c1 drafted · lead CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=57.r1h=626db0c0bece
Fault codes › CPS › CPS SCA100K-T-US-480 / SCA50K-T-US-208
Reports DC overvoltage; look at PV array; confirm with DC voltage measurement.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=57.r1 h=626db0c0beceThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=57.r1 h=626db0c0becehas_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the code prefix
tbl=57.r1 h=626db0c0becereportsc3 drafted · lead DC overvoltage
tbl=57.r1 h=626db0c0beceaffectstbl=57.r1 h=626db0c0becedetected_byc5 drafted · lead DC voltage measurement
Open-circuit PV voltage must stay below 1000 V; contact service if the alarm persists.
tbl=57.r1 h=626db0c0becereview note: support check: partial - Passage says to measure DC terminal voltage and keep open-circuit PV voltage under 1000 V, but 'detected by' DC voltage…
applies_toc6 drafted · lead CPS SCA100K-T-US-480 / SCA50K-T-US-208
tbl=57.r1 h=626db0c0bece