Fault codes › SMA › Sunny Tripower CORE1-US (STP 33/50/62-US-41)
SMA CORE1-US 3412
- Code
3412
- Shown as
- DC overvoltage > Disconnect PV array
- Page
- 49
- ID
fc:sma-stp-core1-us-3412
- IRI
https://solarlattice.org/kb/fc/sma-stp-core1-us-3412
- Status
- active
- Also known as
- 3412, SMA 3412, DC overvoltage > Disconnect PV array
- Category
- Inverters
Class
fault drafted · lead
Production
not stated
Decoded
Reports DC overvoltage; look at PV array; confirm with DC voltage measurement; do: string voltage margin design, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
Defined in
The manufacturer's own cause and corrective text is not reproduced here.
Same condition on other equipment
- ABB / FIMER
- ABB / FIMER PVS-166-175-TL E002, ABB / FIMER PVS-166-175-TL E057, ABB / FIMER PVS-60-TL CODE:06, ABB / FIMER PVS-60-TL E002, ABB / FIMER PVS-60-TL E057, ABB / FIMER TRIO-20.0-27.6-TL CODE:06, ABB / FIMER TRIO-20.0-27.6-TL E002, ABB / FIMER TRIO-20.0-27.6-TL E057, ABB / FIMER UNO-DM-3.3-5.0-PLUS CODE:06, ABB / FIMER UNO-DM-3.3-5.0-PLUS E002, ABB / FIMER UNO-DM-3.3-5.0-PLUS E057, ABB / FIMER UNO-DM-6.0-PLUS CODE:06, ABB / FIMER UNO-DM-6.0-PLUS E002, ABB / FIMER UNO-DM-6.0-PLUS E057
- CPS
- CPS SCA25KTL-208 PV2VoltOver, CPS SCA25KTL-480 PVVoltOver, CPS SCA36KTL PV2VoltOver, CPS SCA50-100K-T Fault4040, CPS SCA50-100K-T Protect0370, CPS SCA50-100K-T Protect0420, CPS SCA50-100K-T Protect0440, CPS SCA50-100K-T Protect0800, CPS SCA50-100K-T Protect0830, CPS SCA50-100K-T Protect0860, CPS SCA50-60KTL PV2VoltOver, CPS SCH100-125KTL PVVoltOver, CPS SCH125KTL-AIO PVVoltOver, CPS SCH275KTL PVVoltOver, CPS SCH350KTL PVVoltOver
- Canadian Solar
- Canadian Solar 125K-T600GL02 OV-DC, Canadian Solar 125KTL-GS-E OV-DC, Canadian Solar 185-255K OV-DC01/02/03/04, Canadian Solar 23-28KTL-CT PVVoltOver, Canadian Solar 25-40K-T480GL01 OV-DC, Canadian Solar 25-40KTL-GS-FL OV-DC, Canadian Solar 50-66K-T480GL01 OV-DC, Canadian Solar 50-66KTL-GS-FL OV-DC, Canadian Solar 75-100K-T480GL02 OV-DC
- Fronius
- Fronius Galvo 309, Fronius Symo 309, Fronius Symo 313
- Huawei
- Huawei SUN2000-100KTL-USH0 2001, Huawei SUN2000-25-30KTL-US 103, Huawei SUN2000-45KTL-US-HV-D0 103
- KACO new energy
- KACO new energy blueplanet TL3 118, KACO new energy blueplanet TL3 119, KACO new energy blueplanet TL3 38, KACO new energy blueplanet TL3 60
- SMA
- SMA SB-US-40 3401-3407, SMA SB-US-41 3401, SMA SB-US-41 3402, SMA SB-US-41 3407, SMA SBSE-US-50 3401, SMA SBSE-US-50 3402, SMA SBSE-US-50 3407, SMA SBSE-US-50 3410, SMA SBSE-US-50 3411, SMA CORE1-US 3401, SMA CORE1-US 3402, SMA CORE1-US 3404, SMA CORE1-US 3407, SMA CORE1-US 3410, SMA CORE1-US 3411, SMA STP-TL-US 3401-3402, SMA SC-CP-XT 3403, SMA SC-CP-XT 3404, SMA SC-CP-XT 3406, SMA SI-US W853, SMA SI-US W863, SMA SI-US W873, SMA SI-US W883
- Schneider Electric
- Schneider Electric CL125 040
- Solis
- Solis 1P-4G-US OV-DC, Solis 3P-5G-US OV-DC01/02/03/04, Solis RHI-1P-HV OV-DC01/02/03/04, Solis S5-GC OV-DC, Solis S6-EH1P OV-DC01/02/03/04, Solis S6-EH2P OV-DC01, Solis S6-EH2P OV-DC02, Solis S6-EH3P30-60K OV-DC01, Solis S6-EH3P30-60K OV-DC02, Solis S6-EH3P75-150K OV-DC01, Solis S6-EH3P75-150K OV-DC02, Solis S6-GC OV-DC, Solis S6-GU OV-DC
- Yaskawa Solectria
- Yaskawa Solectria PVI-14-20TL PV1 (2) VoltOver, Yaskawa Solectria PVI-25TL-R PVVoltOver, Yaskawa Solectria PVI-TL PV1 (2) VoltOver, Yaskawa Solectria SGI-XTM DC Volt High
Claims
defined_in
c1 drafted · lead
STP33-62-US-41-BA-en-14
reports
c2 drafted · lead
DC overvoltage
affects
c3 drafted · lead
PV array
detected_by
c4 drafted · lead
DC voltage measurement
review note: support check: partial - Checking DC voltage is instructed but detection by DC voltage measurement is not explicitly stated.
mitigated_by
c5 drafted · lead
String voltage margin design
When DC voltage exceeds the inverter maximum input voltage
c6 drafted · lead
Contact manufacturer service
Escalation if the message recurs frequently
has_event_class
c7 drafted · lead
Fault (device stops or needs intervention)
review note: support check: partial - Overvoltage that can destroy the inverter and immediate disconnect imply a fault, but no explicit classification.
has_recovery
c8 drafted · lead
Manual reset (operator restarts or acknowledges)
Operator disconnects, verifies DC voltage and reconnects; service if frequent
review note: support check: partial - Manual disconnect/check/reconnect is described, but no explicit manual reset is stated.
applies_to
c9 drafted · lead
Sunny Tripower CORE1-US
Data