c1 drafted · lead SBxx-US-1XP-41-BA-en-12
- SBxx-US-1XP-41-BA-en-12
sec=6.2.20h=58a42ec91edb - SBxx-US-1XP-41-BA-en-12
sec=h264h=41676f7fb1bd
Fault codes › SMA › Sunny Boy 3.0-7.7-US (SBx.x-1SP-US-41)
Reports DC overvoltage; look at PV array; confirm with DC voltage measurement; do: safety isolation, string voltage margin design.
Failure modes that present as the reported condition, and the tests that tell them apart.
sec=6.2.20 h=58a42ec91edbsec=h264 h=41676f7fb1bdThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead SBxx-US-1XP-41-BA-en-12
sec=6.2.20 h=58a42ec91edbsec=h264 h=41676f7fb1bdreportsc2 drafted · lead DC overvoltage
sec=h175 h=587cea85589bsec=h260 h=587cea85589bsec=h264 h=41676f7fb1bdsec=h265 h=f9c84c143221sec=h533 h=7acd25259cf5sec=h534 h=55dc6331d266affectssec=h259 h=5bf6ccea6e5esec=h176 h=5bf6ccea6e5esec=h261 h=5bf6ccea6e5esec=h266 h=33b43893fe4dsec=h535 h=b3b29436b48ddetected_byc4 drafted · lead DC voltage measurement
sec=h259 h=5bf6ccea6e5esec=h176 h=5bf6ccea6e5esec=h261 h=5bf6ccea6e5esec=h266 h=33b43893fe4dsec=h535 h=b3b29436b48dreview note: support check: partial - Corrective steps compare DC voltage with max input voltage, but detection method isn't explicitly stated.
mitigated_byc5 drafted · lead Safety isolation
sec=h259 h=5bf6ccea6e5esec=h176 h=5bf6ccea6e5esec=h261 h=5bf6ccea6e5esec=h266 h=33b43893fe4dsec=h535 h=b3b29436b48dc6 drafted · lead String voltage margin design
When DC voltage exceeds the maximum inverter input voltage.
sec=h259 h=5bf6ccea6e5esec=h176 h=5bf6ccea6e5esec=h261 h=5bf6ccea6e5esec=h266 h=33b43893fe4dsec=h535 h=b3b29436b48dhas_event_classc7 drafted · lead Fault (device stops or needs intervention)
Overvoltage can destroy the inverter; immediate intervention required.
sec=h175 h=587cea85589bsec=h260 h=587cea85589bsec=h265 h=f9c84c143221review note: support check: partial - Disconnect/destroy language implies a fault needing intervention, but 'Fault' classification isn't explicitly stated.
has_recoveryc8 drafted · lead Manual reset (operator restarts or acknowledges)
Operator disconnects and reconnects DC after voltage check; service if the message repeats frequently.
sec=h259 h=5bf6ccea6e5esec=h176 h=5bf6ccea6e5esec=h261 h=5bf6ccea6e5ereview note: support check: partial - Operator disconnect/reconnect and service steps are present, but passages don't state that it clears by manual reset.
applies_toc9 drafted · lead Sunny Boy 3.0-7.7-US-41 proposed
sec=6.2.20 h=58a42ec91edbsec=h264 h=41676f7fb1bd