c1 drafted · lead Sungrow SG200HX-US User Manual
- Sungrow SG200HX-US User Manual
tbl=34.r4h=e8a871c21e3c - Sungrow SG200HX-US User Manual
tbl=35.r1h=b64052214890
Fault codes › Sungrow › Sungrow SG200HX-US
Reports AC overcurrent; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=34.r4 h=e8a871c21e3ctbl=35.r1 h=b64052214890The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead Sungrow SG200HX-US User Manual
tbl=34.r4 h=e8a871c21e3ctbl=35.r1 h=b64052214890reportsc2 drafted · lead AC overcurrent
tbl=47.r3 h=c8a06567896btbl=33.r3 h=c8a06567896bhas_event_classc3 drafted · lead Fault (device stops or needs intervention)
tbl=47.r3 h=c8a06567896btbl=33.r3 h=c8a06567896btbl=34.r4 h=e8a871c21e3ctbl=34.r2 h=b24b52972256has_production_effectc4 drafted · lead Trip (production stops)
tbl=47.r3 h=c8a06567896btbl=33.r3 h=c8a06567896breview note: support check: partial - Reconnection implies disconnection, but production stop is not explicit.
has_recoveryc5 drafted · lead Auto-reset (clears by itself)
Escalation: wait, then power-cycle restart, then contact service.
tbl=47.r3 h=c8a06567896btbl=33.r3 h=c8a06567896btbl=34.r4 h=e8a871c21e3ctbl=34.r2 h=b24b52972256review note: support check: partial - Reconnection after grid normal and the wait/restart/contact escalation are stated, but whether it clears automatically is mixed with manual power-cycle steps.
mitigated_byc6 drafted · lead Inverter restart
tbl=34.r4 h=e8a871c21e3ctbl=34.r2 h=b24b52972256applies_toc7 drafted · lead Sungrow SG200HX-US
tbl=34.r4 h=e8a871c21e3ctbl=35.r1 h=b64052214890