c1 drafted · lead fronius-galvo-208-240-emanual-status-codes
- fronius-galvo-208-240-emanual-status-codes
tbl=17.r1h=deb62095b48d - fronius-galvo-208-240-emanual-status-codes
sec=h20h=5571d6749f75
Fault codes › Fronius › Fronius Galvo 208-240 (1.5-1 to 3.1-1)
Reports AC overcurrent; look at inverter; do: contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=17.r1 h=deb62095b48dsec=h20 h=5571d6749f75The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead fronius-galvo-208-240-emanual-status-codes
tbl=17.r1 h=deb62095b48dsec=h20 h=5571d6749f75reportsc2 drafted · lead AC overcurrent
tbl=14.r1 h=47dcd78e218ctbl=16.r1 h=72f70102d4fetbl=17.r1 h=deb62095b48daffectstbl=16.r1 h=72f70102d4fetbl=17.r1 h=deb62095b48dreview note: support check: partial - The passages say the overcurrent is in the inverter, but they do not name the inverter as a distinct affected…
mitigated_byc4 drafted · lead Contact manufacturer service
Only if the code persists.
tbl=16.r1 h=72f70102d4fetbl=17.r1 h=deb62095b48dhas_event_classc5 drafted · lead Fault (device stops or needs intervention)
tbl=14.r1 h=47dcd78e218ctbl=16.r1 h=72f70102d4fetbl=17.r1 h=deb62095b48dreview note: support check: partial - The passages describe an interruption that corrects automatically, so a fault class is only loosely implied, and they do not…
has_production_effectc6 drafted · lead Trip (production stops)
tbl=14.r1 h=47dcd78e218ctbl=16.r1 h=72f70102d4fetbl=17.r1 h=deb62095b48dhas_recoveryc7 drafted · lead Auto-reset (clears by itself)
Service escalation if persistent.
tbl=16.r1 h=72f70102d4fetbl=17.r1 h=deb62095b48dapplies_toc8 drafted · lead Fronius Galvo 208-240
tbl=17.r1 h=deb62095b48dsec=h20 h=5571d6749f75