Solar Lattice

Fault codes › SMA › Sunny Tripower CORE1-US (STP 33/50/62-US-41)

SMA CORE1-US 8206

Code
8206
ID
fc:sma-stp-core1-us-8206
IRI
https://solarlattice.org/kb/fc/sma-stp-core1-us-8206
Status
active
Also known as
8206, SMA 8206
Category
Inverters
Class fault drafted · lead
Production stops drafted · lead
Clears after a manual reset drafted · lead

Decoded

Reports operation inhibited; may indicate arc fault; look at DC cable, DC connector; confirm with visual inspection; do: DC wiring check.

What can be behind Operation inhibited

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL W058, ABB / FIMER PVS-60-TL W058, ABB / FIMER UNO-DM-3.3-5.0-PLUS W058, ABB / FIMER UNO-DM-6.0-PLUS W058
SMA
SMA SB-US-40 8206, SMA SB-US-41 8206, SMA SBSE-US-50 9102, SMA STP-TL-US 8206, SMA SI-US W804, SMA SI-US W805

Same code in other families

Claims

defined_in

c1 drafted · lead Events 8206 and 8210 with STP-US-41

reports

c2 drafted · lead Operation inhibited

indicates

c3 drafted · lead Arc fault

affects

c4 drafted · lead DC cable

c5 drafted · lead DC connector

detected_by

c6 drafted · lead Visual inspection

mitigated_by

c7 drafted · lead DC wiring check

review note: support check: partial - Inspecting DC conductors and connectors for damage is similar to a wiring check, but only partly matches.

has_event_class

c8 drafted · lead Fault (device stops or needs intervention)

review note: support check: partial - Stops feed-in into operation inhibition suggests a fault, but the classification isn't explicitly stated; it is implied by stopping the device.

has_production_effect

c9 drafted · lead Trip (production stops)

has_recovery

c10 drafted · lead Manual reset (operator restarts or acknowledges)

applies_to

c11 drafted · lead Sunny Tripower CORE1-US

Data