Solar Lattice

Fault codes › ABB / FIMER › FIMER PVS-60-TL-US

ABB / FIMER PVS-60-TL W058

Code
W058
Shown as
System Frozen
Vendor severity
Warning
Page
154
ID
fc:abb-pvs-60-tl-us-w58
IRI
https://solarlattice.org/kb/fc/abb-pvs-60-tl-us-w58
Status
active
Also known as
W058, w58, ABB / FIMER W058, System Frozen
Category
Inverters
Class warning drafted · lead
Production stops drafted · lead
Clears not stated

Decoded

Reports operation inhibited; do: complete device configuration.

What can be behind Operation inhibited

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL W058, ABB / FIMER UNO-DM-3.3-5.0-PLUS W058, ABB / FIMER UNO-DM-6.0-PLUS W058
SMA
SMA SB-US-40 8206, SMA SB-US-41 8206, SMA SBSE-US-50 9102, SMA CORE1-US 8206, SMA STP-TL-US 8206, SMA SI-US W804, SMA SI-US W805

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER PVS-60-TL-US Product Manual RevB

has_event_class

c2 drafted · lead Warning (device continues, a condition is flagged)

from the code prefix

reports

c3 drafted · lead Operation inhibited

Converter locked until commissioning sets startup and grid connection conditions

has_production_effect

c4 drafted · lead Trip (production stops)

Converter does not start or connect while locked

review note: support check: partial - The locked state and missing startup/grid-connection conditions are stated, but the passages never say production stops or that the converter…

mitigated_by

c5 drafted · lead Complete device configuration

Finish commissioning; if it persists after a restart, contact support

applies_to

c6 drafted · lead FIMER PVS-60-TL-US string inverter

Data