c1 drafted · lead Conext CL125 Owners Guide 975-0793 RevA
- Conext CL125 Owners Guide 975-0793 RevA
tbl=53.r1h=40e13e059a31
Fault codes › Schneider Electric › Schneider Electric Conext CL125
Reports grid frequency out of range; confirm with grid frequency measurement; do: utility company consultation.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=53.r1 h=40e13e059a31tbl=32.r7 h=bd042b332a90The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead Conext CL125 Owners Guide 975-0793 RevA
tbl=53.r1 h=40e13e059a31c2 drafted · lead Conext CL125 Modbus App Note
tbl=32.r7 h=bd042b332a90reportsc3 drafted · lead Grid frequency out of range
tbl=53.r1 h=40e13e059a31tbl=32.r7 h=bd042b332a90review note: review: partial - The row calls it a grid frequency redundancy event and says to measure the frequency; it allows that the frequency may exceed…
detected_byc4 drafted · lead Grid frequency measurement
tbl=53.r1 h=40e13e059a31tbl=32.r7 h=bd042b332a90review note: support check: partial - Measuring grid frequency is the remedy step; the detection is a redundancy event, not stated as measurement.
mitigated_byc5 drafted · lead Utility company consultation
When frequency exceeds the range; if within range and persisting, contact technical support.
tbl=53.r1 h=40e13e059a31tbl=32.r7 h=bd042b332a90applies_toc6 drafted · lead Schneider Electric Conext CL125
tbl=53.r1 h=40e13e059a31tbl=32.r7 h=bd042b332a90