c1 drafted · lead CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=70.r1h=eb8005ab1ad3
Fault codes › CPS › CPS SCA100K-T-US-480 / SCA50K-T-US-208
CPS SCA50-100K-T PFault0050
Production
not stated
Decoded
Reports DC overcurrent; do: inverter restart.
What can be behind DC overcurrent
Failure modes that present as the reported condition, and the tests that tell them apart.
Defined in
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0 — CPS (Chint Power Systems) · page 152 drafted · lead
tbl=70.r1h=eb8005ab1ad3
The manufacturer's own cause and corrective text is not reproduced here.
Same condition on other equipment
Claims
defined_in
has_event_class
c2 verified · fact Fault (device stops or needs intervention)
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=70.r1h=eb8005ab1ad3 - CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=69h=ea31ef6dd96a
verified by: review-workflowverified on: 2026-10-23review note: support check: partial - Row is in a Hardware Faults table and requires intervention (restart), implying fault, but no explicit classification is stated.
reports
c3 drafted · lead DC overcurrent
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=70.r1h=eb8005ab1ad3
review note: review: partial - The row states a boost hardware overcurrent, but nothing in the passages says the current is on the DC side, so 'DC…
mitigated_by
c4 drafted · lead Inverter restart
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=70.r1h=eb8005ab1ad3
has_recovery
c5 drafted · lead Manual reset (operator restarts or acknowledges)
Power-cycle AC and DC first; contact service if it persists.
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=70.r1h=eb8005ab1ad3
applies_to
c6 drafted · lead CPS SCA100K-T-US-480 / SCA50K-T-US-208
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=70.r1h=eb8005ab1ad3