c1 drafted · lead XGI 1500 1MW IOM DOCR-071091-H
- XGI 1500 1MW IOM DOCR-071091-H
tbl=22.r3h=d1c666db0e5b
Fault codes › Yaskawa Solectria › Yaskawa Solectria XGI 1500-1MW
Reports firmware update failure; look at communication processor; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=22.r3 h=d1c666db0e5bThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead XGI 1500 1MW IOM DOCR-071091-H
tbl=22.r3 h=d1c666db0e5bhas_event_classc2 drafted · lead Warning (device continues, a condition is flagged)
from the table header
tbl=22.r3 h=d1c666db0e5btbl=20 h=75af07aa9414reportsc3 verified · fact Firmware update failure
tbl=22.r3 h=d1c666db0e5btbl=19.r3 h=d1c666db0e5btbl=20.r3 h=d1c666db0e5bverified by: review-workflowverified on: 2026-10-23
affectsc4 drafted · lead Communication processor
tbl=22.r3 h=d1c666db0e5btbl=19.r3 h=d1c666db0e5btbl=20.r3 h=d1c666db0e5bmitigated_byc5 drafted · lead Inverter restart
tbl=22.r3 h=d1c666db0e5btbl=19.r3 h=d1c666db0e5btbl=20.r3 h=d1c666db0e5bhas_production_effectc6 drafted · lead Trip (production stops)
tbl=22.r3 h=d1c666db0e5bsec=9.1.2 h=03d6c2913989has_recoveryc7 drafted · lead Manual reset (operator restarts or acknowledges)
Power cycle first; contact service if the error persists.
tbl=22.r3 h=d1c666db0e5btbl=19.r3 h=d1c666db0e5btbl=20.r3 h=d1c666db0e5breview note: support check: partial - A power cycle and then contacting support matches a manual reset, but section 9.1.2 also says warnings can self-recover, so…
applies_toc8 drafted · lead Solectria XGI 1500-1MW
tbl=22.r3 h=d1c666db0e5b