Solar Lattice

Fault codes › Schneider Electric › Schneider Electric Conext CL125

Schneider Electric CL125 053

Code
053
Shown as
Grid voltage redundancy event is detected.
Page
128
ID
fc:schneider-electric-conext-cl125-53
IRI
https://solarlattice.org/kb/fc/schneider-electric-conext-cl125-53
Status
active
Also known as
053, 53, Schneider Electric 053, Grid voltage redundancy event is detected.
Category
Inverters
Class not stated
Production not stated
Clears not stated

Decoded

Reports grid voltage out of range; confirm with grid voltage measurement; do: utility company consultation.

What can be behind Grid voltage out of range

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

CPS
CPS SCA25KTL-208 GridV.OutLim, CPS SCA25KTL-480 GridV.OutLim, CPS SCA36KTL GridV.OutLim, CPS SCA50-100K-T Protect0080, CPS SCA50-60KTL GridV.OutLim, CPS SCH100-125KTL GridV.OutLim, CPS SCH125KTL-AIO GridV.OutLim, CPS SCH200-250K-T GridV.OutLim, CPS SCH275KTL GridV.OutLim, CPS SCH350KTL GridV.OutLim
Canadian Solar
Canadian Solar 23-28KTL-CT GridV.OutLim
Fronius
Fronius Galvo 453, Fronius Primo 453, Fronius Symo 453
Huawei
Huawei SUN2000-25-30KTL-US 301, Huawei SUN2000-45KTL-US-HV-D0 301
KACO new energy
KACO new energy blueplanet TL3 47
SMA
SMA SC-CP-XT 1500, SMA SI-US W335, SMA SI-US W336, SMA SI-US W337, SMA SI-US W338, SMA SI-US W807
Schneider Electric
Schneider Electric CL125 013, Schneider Electric CL125 003
Sungrow
Sungrow SG-CX-US 013, Sungrow SG200HX 013, Sungrow SG250HX 13, Sungrow SG350HX 013
Yaskawa Solectria
Yaskawa Solectria PVI-14-20TL GridV.OutLim, Yaskawa Solectria PVI-25TL-R GridV.OutLim, Yaskawa Solectria PVI-TL GridV.OutLim

Claims

defined_in

c1 drafted · lead Conext CL125 Owners Guide 975-0793 RevA

c2 drafted · lead Conext CL125 Modbus App Note

reports

c3 drafted · lead Grid voltage out of range

review note: support check: partial - A grid voltage redundancy event with a check against permissible limits suggests out-of-range voltage, but the passages do not state…

detected_by

c4 drafted · lead Grid voltage measurement

review note: support check: partial - Measuring grid voltage is the remedy step; the detection is a redundancy event, not stated as measurement.

mitigated_by

c5 drafted · lead Utility company consultation

Applies when measured grid voltage exceeds the permitted limit; otherwise escalate to technical support.

applies_to

c6 drafted · lead Schneider Electric Conext CL125

Data