c1 drafted · lead CPS SCH200-250K-T-US User Manual Aug 2026
- CPS SCH200-250K-T-US User Manual Aug 2026
tbl=43.r1h=44a791cf9744
Fault codes › CPS › CPS SCH200K-T-US-480 / SCH250K-T-US-600
Reports grid voltage out of range; confirm with grid voltage measurement; do: AC connection check.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=43.r1 h=44a791cf9744The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CPS SCH200-250K-T-US User Manual Aug 2026
tbl=43.r1 h=44a791cf9744reportsc2 drafted · lead Grid voltage out of range
tbl=50.r4 h=07d005ffe789tbl=36.r4 h=800b94fc4b9adetected_byc3 drafted · lead Grid voltage measurement
tbl=50.r4 h=07d005ffe789review note: support check: partial - Passages imply AC voltage is checked against range but don't state a grid voltage measurement detection method.
mitigated_byc4 drafted · lead AC connection check
tbl=36.r4 h=800b94fc4b9atbl=50.r4 h=07d005ffe789tbl=57.r2 h=6ec924c33315tbl=31.r4 h=cac2c2524082tbl=43.r1 h=44a791cf9744tbl=27.r1 h=76ed8f2716c1tbl=34.r12 h=44a791cf9744has_production_effectc5 drafted · lead Trip (production stops)
Restart needed implies inverter stopped
tbl=36.r4 h=800b94fc4b9atbl=50.r4 h=07d005ffe789tbl=57.r2 h=6ec924c33315tbl=31.r4 h=cac2c2524082tbl=43.r1 h=44a791cf9744tbl=27.r2 h=84a4c51bb192tbl=34.r12 h=44a791cf9744review note: support check: partial - Restart instruction implies stoppage but passages never state that feed-in stops or that it is a trip.
has_recoveryc6 drafted · lead Manual reset (operator restarts or acknowledges)
Restart after verifying grid connection; service if not cleared
tbl=36.r4 h=800b94fc4b9atbl=50.r4 h=07d005ffe789tbl=57.r2 h=6ec924c33315tbl=31.r4 h=cac2c2524082tbl=43.r1 h=44a791cf9744tbl=27.r2 h=84a4c51bb192tbl=34.r12 h=44a791cf9744applies_toc7 drafted · lead CPS SCH200K-T-US-480 / SCH250K-T-US-600
tbl=43.r1 h=44a791cf9744