c1 drafted · lead CSI 23-28KTL-CT Inverter Installation Manual
- CSI 23-28KTL-CT Inverter Installation Manual
tbl=31.r1h=130d15b275c1
Fault codes › Canadian Solar › CSI 23/28KTL-CT/US-480
Reports arc fault detected; may indicate arc fault; look at DC cable, arc fault detection board; do: DC wiring check, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=31.r1 h=130d15b275c1The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CSI 23-28KTL-CT Inverter Installation Manual
tbl=31.r1 h=130d15b275c1has_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the Type column
tbl=31.r1 h=130d15b275c1reportsc3 drafted · lead Arc fault detected
tbl=31.r1 h=130d15b275c1indicatestbl=31.r1 h=130d15b275c1verified by: review-workflowverified on: 2026-10-23
affectstbl=31.r1 h=130d15b275c1c6 drafted · lead Arc fault detection board
tbl=31.r1 h=130d15b275c1mitigated_byc7 drafted · lead DC wiring check
tbl=31.r1 h=130d15b275c1c8 drafted · lead Contact manufacturer service
tbl=31.r1 h=130d15b275c1has_production_effectc9 drafted · lead Trip (production stops)
tbl=31.r1 h=130d15b275c1sec=7.1.2 h=796c028bf931review note: support check: partial - The general text says the inverter shuts down on faults, but the row does not explicitly state production stops.
has_recoveryc10 drafted · lead Manual reset (operator restarts or acknowledges)
Operator clears the arc fault via menu command; inspect PV wiring, then service.
tbl=31.r1 h=130d15b275c1applies_toc11 drafted · lead CSI 23/28KTL-CT/US-480
tbl=31.r1 h=130d15b275c1