Solar Lattice

Fault codes › Yaskawa Solectria › Solectria PVI 20/25TL-480-R

Yaskawa Solectria PVI-25TL-R Protect0030

Code: Protect0030
Shown as: Inverter Over Current
Vendor severity: Protection
Page: 80
ID: fc:yaskawa-solectria-pvi-20-25tl-480-r-protect30
IRI: https://solarlattice.org/kb/fc/yaskawa-solectria-pvi-20-25tl-480-r-protect30
Status: active
Also known as: Protect0030, protect30, Yaskawa Solectria Protect0030, Inverter Over Current
Category: Inverters

Class fault drafted · lead

Production not stated

Clears after a manual reset drafted · lead

Decoded

Reports inverter overcurrent; do: inverter restart, inverter replacement.

What can be behind Inverter overcurrent

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

PVI 20-25TL-480-R IOM DOCR-071030-A — Yaskawa Solectria Solar · page 80 drafted · lead
- tbl=35.r3 h=0ea62c5cf5f4

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

Claims

`defined_in`

c1 drafted · lead PVI 20-25TL-480-R IOM DOCR-071030-A

PVI 20-25TL-480-R IOM DOCR-071030-A tbl=35.r3 h=0ea62c5cf5f4

`has_event_class`

c2 drafted · lead Fault (device stops or needs intervention)

from the code prefix

PVI 20-25TL-480-R IOM DOCR-071030-A tbl=35.r3 h=0ea62c5cf5f4

`reports`

c3 drafted · lead Inverter overcurrent

PVI 20-25TL-480-R IOM DOCR-071030-A tbl=35.r3 h=0ea62c5cf5f4

`mitigated_by`

c4 drafted · lead Inverter restart

PVI 20-25TL-480-R IOM DOCR-071030-A tbl=35.r3 h=0ea62c5cf5f4

c6 drafted · lead Inverter replacement

Only if the restart does not clear it

PVI 20-25TL-480-R IOM DOCR-071030-A tbl=35.r3 h=0ea62c5cf5f4

`has_recovery`

c5 drafted · lead Manual reset (operator restarts or acknowledges)

Power-cycle AC and DC first; replace the inverter if the fault persists

PVI 20-25TL-480-R IOM DOCR-071030-A tbl=35.r3 h=0ea62c5cf5f4

`applies_to`

c7 drafted · lead Solectria PVI 20/25TL-480-R

PVI 20-25TL-480-R IOM DOCR-071030-A tbl=35.r3 h=0ea62c5cf5f4

Data