c1 drafted · lead CPS 25kW User Manual Rev 2.1
- CPS 25kW User Manual Rev 2.1
tbl=57.r1h=b667b4ff09bf
Fault codes › CPS › CPS SCA25KTL-DO-R/US-480
Reports inverter overcurrent; look at inverter; do: inverter restart, inverter replacement.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=57.r1 h=b667b4ff09bfThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CPS 25kW User Manual Rev 2.1
tbl=57.r1 h=b667b4ff09bfhas_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the code prefix
tbl=57.r1 h=b667b4ff09bfreportsc3 drafted · lead Inverter overcurrent
tbl=35.r2 h=695c0ef30443tbl=50.r3 h=3d6d892ff6c2tbl=57.r1 h=b667b4ff09bftbl=31.r3 h=9af8329118fftbl=26.r2 h=695c0ef30443affectstbl=35.r2 h=695c0ef30443tbl=50.r3 h=3d6d892ff6c2tbl=57.r1 h=b667b4ff09bftbl=31.r3 h=9af8329118fftbl=26.r2 h=695c0ef30443has_production_effectc5 drafted · lead Trip (production stops)
Power cycle needed to clear implies inverter stopped
tbl=35.r2 h=695c0ef30443tbl=50.r3 h=3d6d892ff6c2tbl=57.r1 h=b667b4ff09bftbl=31.r3 h=9af8329118fftbl=26.r2 h=695c0ef30443review note: support check: partial - Power cycle and replacement are recommended, but a stop of production is not stated; it is only implied.
has_recoveryc6 drafted · lead Manual reset (operator restarts or acknowledges)
AC and DC power cycle; replace inverter if fault persists
tbl=35.r2 h=695c0ef30443tbl=50.r3 h=3d6d892ff6c2tbl=57.r1 h=b667b4ff09bftbl=31.r3 h=9af8329118fftbl=26.r2 h=695c0ef30443mitigated_byc7 drafted · lead Inverter restart
tbl=35.r2 h=695c0ef30443tbl=50.r3 h=3d6d892ff6c2tbl=57.r1 h=b667b4ff09bftbl=31.r3 h=9af8329118fftbl=26.r2 h=695c0ef30443c8 drafted · lead Inverter replacement
Only if restart does not clear the fault
tbl=35.r2 h=695c0ef30443tbl=50.r3 h=3d6d892ff6c2tbl=57.r1 h=b667b4ff09bftbl=31.r3 h=9af8329118fftbl=26.r2 h=695c0ef30443applies_toc9 drafted · lead CPS SCA25KTL-DO-R/US-480
tbl=57.r1 h=b667b4ff09bf