c1 drafted · lead CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=61.r5h=e4279da7e290
Fault codes › CPS › CPS SCA100K-T-US-480 / SCA50K-T-US-208
CPS SCA50-100K-T Protect1060
Production
not stated
Decoded
Reports inverter overcurrent.
What can be behind Inverter overcurrent
Failure modes that present as the reported condition, and the tests that tell them apart.
Defined in
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0 — CPS (Chint Power Systems) · page 143 drafted · lead
tbl=61.r5h=e4279da7e290
The manufacturer's own cause and corrective text is not reproduced here.
Same condition on other equipment
Claims
defined_in
has_event_class
c2 drafted · lead Fault (device stops or needs intervention)
from the code prefix
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=61.r5h=e4279da7e290
reports
c3 drafted · lead Inverter overcurrent
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=61.r5h=e4279da7e290
review note: support check: partial - Bus Current High is not exactly inverter overcurrent; the mapping is loose though plausible.
has_recovery
c4 drafted · lead Auto-reset (clears by itself)
Expected to clear on its own within minutes; service if it persists.
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=61.r5h=e4279da7e290
review note: support check: partial - Observing 5 minutes for auto-elimination implies auto-reset, with service if persisting.
applies_to
c5 drafted · lead CPS SCA100K-T-US-480 / SCA50K-T-US-208
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=61.r5h=e4279da7e290