Solar Lattice

Product

Solectria PVI 20/25TL-480-R

ID
prod:yaskawa-solectria-pvi-20-25tl-480-r
IRI
https://solarlattice.org/kb/prod/yaskawa-solectria-pvi-20-25tl-480-r
Status
active
Also known as
PVI 20 25 TL 480 R, PVI 20-25TL-480-R, PVI 25TL-480-R, SOLECTRIA PVI 25TL-480-R, SOLECTRIA PVI 25TL
Category
Inverters
Make
yaskawa-solectria
Product level
family

The Solectria PVI 25TL-480-R from Yaskawa Solectria Solar is a grid-tied, three-phase, grid-following PV string inverter for commercial or utility-scale sites, with a 1000 VDC input class and 480 VAC output. The datasheet gives a maximum efficiency of 98.5 percent, and maximum PV current is 45 A per zone and 90 A total. It must be used with floating or ungrounded PV arrays only, and it suits rooftop, carport and ground-mount installations; it is not intended for micro-grid or off-grid use, and the manufacturer does not support AC-coupled systems. Communication uses Modbus over RS-485 for third-party monitoring, and the interface can be reached over Wi-Fi from a smart device through the FOMlink wireless antenna. SolrenView monitoring needs the optional Ethernet Network Card, which also gives automatic firmware updates, remote diagnostics and technical support access over the internet. A shade cover is required if the inverter is mounted lower than 75 degrees from horizontal, because it reduces temperature derating. The enclosure is rated NEMA 4X, but an unpowered unit left outdoors for more than 90 days can collect condensation on the heatsink. Inspect the power head before applying DC or AC power, or a short circuit can result.

Claims

manufactured_by

c1 drafted · lead Yaskawa Solectria Solar

instance_of

c2 drafted · lead Inverter

Grid-tied, three-phase, grid-following PV string inverter for commercial or utility-scale use.

uses_protocol

c3 drafted · lead Modbus

Modbus over RS-485.

c4 drafted · lead RS-485

Conditions: Required for third-party monitoring/DAS connections; shielded twisted-pair cable.

c5 drafted · lead Wi-Fi

Interface accessed from a smart device through the FOMlink wireless antenna device.

c6 drafted · lead Ethernet

Conditions: Via the optional Ethernet Network Card, needed for SolrenView monitoring.

implements

c7 drafted · lead Remote firmware update

Conditions: Requires internet connection through the Ethernet Network Card.

review note: support check: partial - Automatic firmware upgrades via Ethernet card/internet are stated, but 'remote firmware update' and internet-through-Ethernet-card requirement are only loosely implied.

c8 drafted · lead Remote maintenance access proposed

Remote diagnostics and troubleshooting and access for manufacturer technical support when connected to the internet.

compatible_with

c9 verified · fact Grid-tied PV without storage

Scope: applications on-grid

verified by: review-workflowverified on: 2026-10-24

c10 drafted · lead Ungrounded PV array

To be installed with floating or ungrounded PV arrays only.

c11 verified · fact Rooftop PV

verified by: review-workflowverified on: 2026-10-24

c12 drafted · lead Solar carport

c13 drafted · lead Ground-mounted PV

incompatible_with

c14 drafted · lead Microgrid

Not intended for micro-grid use.

c15 drafted · lead Off-grid system

Scope: applications off-grid

Not intended for off-grid use.

efficiency

c16 drafted · lead nominal 98.5 PERCENT

Conditions: Maximum (peak) efficiency per datasheet

max_input_current

c17 drafted · lead ≤ 45 A

Conditions: Maximum PV current (Isc x 1.25) per zone, PVI 25TL-480-R

c18 drafted · lead ≤ 90 A

Conditions: Maximum PV current (Isc x 1.25) total, PVI 25TL-480-R

nominal_voltage

c19 drafted · lead nominal 480 V

Conditions: AC output voltage

max_input_voltage

c20 drafted · lead nominal 1000 V

Conditions: DC system voltage class of the commercial string inverter

review note: support check: partial - Passage says 1000VDC string inverter class, but not explicitly a maximum input voltage.

Referenced by

Data