c1 drafted · lead CSI Installation Manual 75-100K T480GL02-U USA V1.1 20211116
- CSI Installation Manual 75-100K T480GL02-U USA V1.1 20211116
tbl=9.r4h=cab3a7061bcd
Fault codes › Canadian Solar › CSI-75/80/90/100K-T480GL02-U
Reports grid undervoltage; look at voltage sensor; confirm with grid voltage measurement; do: inverter parameter adjustment, inverter replacement.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=9.r4 h=cab3a7061bcdThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CSI Installation Manual 75-100K T480GL02-U USA V1.1 20211116
tbl=9.r4 h=cab3a7061bcdreportsc2 verified · fact Grid undervoltage
tbl=6.r4 h=56652641b6cdtbl=7.r4 h=27e8f024f37etbl=10.r4 h=cab3a7061bcdtbl=12.r4 h=cab3a7061bcdtbl=9.r4 h=cab3a7061bcdverified by: review-workflowverified on: 2026-10-23
detected_byc3 drafted · lead Grid voltage measurement
tbl=6.r4 h=56652641b6cdtbl=7.r4 h=27e8f024f37etbl=10.r4 h=cab3a7061bcdtbl=12.r4 h=cab3a7061bcdtbl=9.r4 h=cab3a7061bcdmitigated_byc4 drafted · lead Inverter parameter adjustment
Lower limit adjusted only with utility approval.
tbl=6.r4 h=56652641b6cdtbl=7.r4 h=27e8f024f37etbl=10.r4 h=cab3a7061bcdtbl=12.r4 h=cab3a7061bcdtbl=9.r4 h=cab3a7061bcdc6 drafted · lead Inverter replacement
Escalation after measurement and grid standard checks.
tbl=6.r4 h=56652641b6cdtbl=7.r4 h=27e8f024f37etbl=10.r4 h=cab3a7061bcdtbl=12.r4 h=cab3a7061bcdtbl=9.r4 h=cab3a7061bcdaffectsc5 drafted · lead Voltage sensor
Applies when display reading disagrees with measured voltage.
tbl=6.r4 h=56652641b6cdtbl=7.r4 h=27e8f024f37etbl=10.r4 h=cab3a7061bcdtbl=12.r4 h=cab3a7061bcdtbl=9.r4 h=cab3a7061bcdapplies_toc7 drafted · lead CSI-75/80/90/100K-T480GL02-U
tbl=9.r4 h=cab3a7061bcd