Solar Lattice

Fault codes › Fronius › Fronius Symo UL (10.0-3 to 24.0-3 208-240/480)

Fronius Symo 314

Code
314
Shown as
Timeout current sensor calibration
Vendor severity
Class 3
ID
fc:fronius-symo-314
IRI
https://solarlattice.org/kb/fc/fronius-symo-314
Status
active
Also known as
314, Fronius 314, Timeout current sensor calibration
Category
Inverters
Class fault drafted · lead
Production stops drafted · lead
Clears by itself drafted · lead

Decoded

Reports current sensor calibration timeout; look at current sensor; do: contact manufacturer service.

What can be behind Current sensor calibration timeout

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Claims

defined_in

c1 drafted · lead fronius-symo-ul-emanual-status-codes

reports

c2 drafted · lead Current sensor calibration timeout

affects

c3 drafted · lead Current sensor

has_event_class

c4 drafted · lead Fault (device stops or needs intervention)

review note: support check: partial - The row describes a short interruption of feed-in, which suggests a trip, but doesn't call it a fault.

has_production_effect

c5 drafted · lead Trip (production stops)

has_recovery

c6 drafted · lead Auto-reset (clears by itself)

Resumes automatically; service technician if persistent.

mitigated_by

c7 drafted · lead Contact manufacturer service

Only when the code persists.

review note: support check: partial - The remedy marker '*)' maps to 'if status code persists: contact a Fronius-trained service technician', but the passages never link…

applies_to

c8 drafted · lead Fronius Symo

Data