Solar Lattice

Product

Fronius Symo

ID
prod:fronius-symo
IRI
https://solarlattice.org/kb/prod/fronius-symo
Status
active
Also known as
Symo, Symo 24.0-3 480
Category
Inverters
Make
fronius
Product level
family

The Fronius Symo is a family of Fronius inverters, and the 480 V models include the Symo 15.0-3 480, 17.5-3 480 and 24.0-3 480. The firmware changelog also covers the Symo 3.0-3-S to 4.5-3-S, 3.0-3-M to 8.2-3-M and 10.0-3-M to 20.0-3-M models. Data communication uses Fronius Solar Net, which is the factory-set protocol type, and Interface is the other option. The Interface protocol type only works without a Fronius Datamanager card, so take out any installed Datamanager card before you use it. Status code 103 means the AC voltage is too low, and status code 106 means the AC frequency is too low. The operating instructions include a section on FCC and RSS compliance.

<!-- review notes

Claims

uses_protocol

c1 drafted · lead Fronius Solar Net

Fronius Solar Net is the factory-set protocol type; the alternative setting is Interface.

review note: support check: partial - Passages show Fronius Solar Net is the factory-set protocol type with Interface as the alternative, but don't explicitly tie it to Symo in the passage text.

incompatible_with

c2 drafted · lead Fronius Datamanager

Conditions: Only when the protocol type is set to Interface

With the Interface protocol type, any Fronius Datamanager card fitted in the inverter must be taken out.

Referenced by

Data