Solar Lattice

Fault codes › KACO new energy › KACO blueplanet 87.0-165 TL3

KACO new energy blueplanet TL3 180

Code
180
Shown as
Pre-synchronisation not pos-sible
Page
108
ID
fc:kaco-blueplanet-87-165-tl3-180
IRI
https://solarlattice.org/kb/fc/kaco-blueplanet-87-165-tl3-180
Status
active
Also known as
180, KACO new energy 180, Pre-synchronisation not pos-sible
Category
Inverters
Class fault drafted · lead
Production stops drafted · lead
Clears after a manual reset verified · fact

Decoded

Reports grid synchronization failure; do: inverter restart.

What can be behind Grid synchronization failure

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

CPS
CPS SCA50-100K-T Protect0690
SMA
SMA SB-US-41 0205, SMA SC-CP-XT 0205, SMA SC-CP-XT 6425
Yaskawa Solectria
Yaskawa Solectria SGI-XTM Flux Error, Yaskawa Solectria XGI-1500-1MW WARN-2, Yaskawa Solectria XGI-1500-DCG WARN-2, Yaskawa Solectria XGI-1500 WARN-2

Claims

defined_in

c1 drafted · lead KACO blueplanet 87.0-165 TL3 Operating Manual EN 2020-10 (Siemens-hosted copy)

reports

c2 drafted · lead Grid synchronization failure

mitigated_by

c3 drafted · lead Inverter restart

has_event_class

c4 drafted · lead Fault (device stops or needs intervention)

review note: support check: partial - Not explicitly classed; implied only weakly by the need for intervention.

has_production_effect

c5 drafted · lead Trip (production stops)

Without pre-synchronisation to the grid, the device cannot connect.

review note: support check: partial - Pre-synchronisation not possible implies no connection, but no trip or stop is stated.

has_recovery

c6 verified · fact Manual reset (operator restarts or acknowledges)

verified by: review-workflowverified on: 2026-10-23

applies_to

c7 drafted · lead KACO blueplanet 87.0-165 TL3

Data