Solar Lattice

Fault codes › KACO new energy › KACO blueplanet 87.0-165 TL3

KACO new energy blueplanet TL3 150

Code
150
Shown as
Protective shutdown drop reference ADC
Page
108
ID
fc:kaco-blueplanet-87-165-tl3-150
IRI
https://solarlattice.org/kb/fc/kaco-blueplanet-87-165-tl3-150
Status
active
Also known as
150, KACO new energy 150, Protective shutdown drop reference ADC
Category
Inverters
Class fault verified · fact
Production stops drafted · lead
Clears after a manual reset drafted · lead

Decoded

Reports reference voltage out of tolerance; do: inverter restart.

What can be behind Reference voltage out of tolerance

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL E026, ABB / FIMER PVS-60-TL E026, ABB / FIMER TRIO-20.0-27.6-TL E026, ABB / FIMER UNO-DM-3.3-5.0-PLUS E026, ABB / FIMER UNO-DM-6.0-PLUS E026
Fronius
Fronius Galvo 460, Fronius Primo 460, Fronius Symo 460

Claims

defined_in

c1 drafted · lead KACO blueplanet 87.0-165 TL3 Operating Manual EN 2020-10 (Siemens-hosted copy)

reports

c2 drafted · lead Reference voltage out of tolerance

review note: support check: partial - Row only names a protective shutdown on dropped reference ADC for measurement accuracy; out-of-tolerance reference voltage is inferred.

mitigated_by

c3 drafted · lead Inverter restart

has_event_class

c4 verified · fact Fault (device stops or needs intervention)

verified by: review-workflowverified on: 2026-10-23

has_production_effect

c5 drafted · lead Trip (production stops)

has_recovery

c6 drafted · lead Manual reset (operator restarts or acknowledges)

applies_to

c7 drafted · lead KACO blueplanet 87.0-165 TL3

Data