Solar Lattice

Fault codes › Fronius › Fronius Primo 208-240 (3.8-1 to 15.0-1)

Fronius Primo 558

Code
558
Vendor severity
Class 5
ID
fc:fronius-primo-558
IRI
https://solarlattice.org/kb/fc/fronius-primo-558
Status
active
Also known as
558, Fronius 558
Category
Inverters
Class not stated
Production not stated
Clears not stated

Decoded

Reports hardware component incompatibility; look at control board; do: firmware update.

What can be behind Hardware component incompatibility

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

Fronius
Fronius Galvo 445, Fronius Galvo 558, Fronius Primo 417, Fronius Primo 436, Fronius Primo 438, Fronius Primo 445, Fronius Primo 480, Fronius Primo 481, Fronius Symo 417, Fronius Symo 436, Fronius Symo 438, Fronius Symo 445, Fronius Symo 480, Fronius Symo 481, Fronius Symo 558, Fronius Symo 559, Fronius Symo 564, Fronius Symo 608
Generac
Generac PWRcell Inverter 0X7700, Generac PWRcell Inverter 0X7703, Generac PWRcell Inverter 0X7707

Same code in other families

Claims

defined_in

c1 drafted · lead fronius-primo-208-240-emanual-status-codes

reports

c2 drafted · lead Hardware component incompatibility

affects

c3 drafted · lead Control board

Inverter PC boards, for example after a board replacement.

review note: support check: partial - PC boards in the inverter are incompatible, but the passages do not specifically name the control board.

mitigated_by

c4 drafted · lead Firmware update

If it persists, contact service or the installer.

applies_to

c5 drafted · lead Fronius Primo 208-240

Data