c1 drafted · lead CPS SCH275KTL-DO-US-800 V2 User Manual Rev 1.7
- CPS SCH275KTL-DO-US-800 V2 User Manual Rev 1.7
tbl=26.r7h=535012272447
Fault codes › CPS › CPS SCH275KTL-DO/US-800
Reports self-test failure; look at inverter; do: inverter restart, inverter replacement.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=26.r7 h=535012272447The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CPS SCH275KTL-DO-US-800 V2 User Manual Rev 1.7
tbl=26.r7 h=535012272447has_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the table header
tbl=26.r7 h=535012272447tbl=26 h=4bf40e1a4dd3reportsc3 drafted · lead Self-test failure
tbl=36.r1 h=a985333dbde9tbl=60.r2 h=8adbbd6a5featbl=33.r5 h=30dd11eda55ctbl=26.r7 h=535012272447tbl=34.r9 h=a080e286e0b7tbl=52 h=a81a2643c1b9affectstbl=60.r2 h=8adbbd6a5featbl=33.r5 h=30dd11eda55ctbl=26.r7 h=535012272447tbl=34.r9 h=a080e286e0b7mitigated_byc5 drafted · lead Inverter restart
tbl=60.r2 h=8adbbd6a5featbl=33.r5 h=30dd11eda55ctbl=26.r7 h=535012272447tbl=34.r9 h=a080e286e0b7tbl=52 h=a81a2643c1b9c6 drafted · lead Inverter replacement
tbl=60.r2 h=8adbbd6a5featbl=33.r5 h=30dd11eda55ctbl=26.r7 h=535012272447tbl=34.r9 h=a080e286e0b7tbl=52 h=a81a2643c1b9has_recoveryc7 drafted · lead Manual reset (operator restarts or acknowledges)
Power cycle clears normal case; replace inverter if fault persists.
tbl=60.r2 h=8adbbd6a5featbl=33.r5 h=30dd11eda55ctbl=26.r7 h=535012272447tbl=34.r9 h=a080e286e0b7tbl=52 h=a81a2643c1b9review note: support check: partial - Operator power cycle and replacement if persisting are stated, but nothing says it clears only by manual reset; plausibly implied…
applies_toc8 drafted · lead CPS SCH275KTL-DO/US-800
tbl=26.r7 h=535012272447