c1 drafted · lead FIMER UNO-DM-3.3-5.0-TL-PLUS-US-Q Product Manual RevB
- FIMER UNO-DM-3.3-5.0-TL-PLUS-US-Q Product Manual RevB
tbl=41.r14h=dd4f897b70ee
Fault codes › ABB / FIMER › UNO-DM-3.3/3.8/4.6/5.0-TL-PLUS-US
Reports internal communication failure; look at arc fault detection board; do: inverter restart, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=41.r14 h=dd4f897b70eetbl=56.r6 h=3b11ed9361e3The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead FIMER UNO-DM-3.3-5.0-TL-PLUS-US-Q Product Manual RevB
tbl=41.r14 h=dd4f897b70eec2 drafted · lead UNO-DM-3.3-5.0-TL-PLUS-US Product Manual RevA
tbl=56.r6 h=3b11ed9361e3has_event_classc3 drafted · lead Fault (device stops or needs intervention)
from the code prefix
tbl=41.r14 h=dd4f897b70eetbl=56.r6 h=3b11ed9361e3reportsc4 drafted · lead Internal communication failure
Serial link between inverter and arc detection board
tbl=57.r1 h=9567bd31690atbl=49.r11 h=2253563b3bbbtbl=41.r14 h=dd4f897b70eetbl=39.r14 h=dd4f897b70eetbl=51.r6 h=3b11ed9361e3affectsc5 drafted · lead Arc fault detection board
tbl=57.r1 h=9567bd31690atbl=49.r11 h=2253563b3bbbtbl=41.r14 h=dd4f897b70eetbl=39.r14 h=dd4f897b70eetbl=51.r6 h=3b11ed9361e3mitigated_byc6 drafted · lead Inverter restart
tbl=57.r1 h=9567bd31690atbl=49.r11 h=2253563b3bbbtbl=41.r14 h=dd4f897b70eetbl=39.r14 h=dd4f897b70eetbl=51.r6 h=3b11ed9361e3review note: support check: partial - Restart is implied as a first step, but the passages don't say it mitigates the fault.
c7 drafted · lead Contact manufacturer service
If it persists after a power cycle
tbl=57.r1 h=9567bd31690atbl=49.r11 h=2253563b3bbbtbl=41.r14 h=dd4f897b70eetbl=39.r14 h=dd4f897b70eetbl=51.r6 h=3b11ed9361e3has_recoveryc8 drafted · lead Manual reset (operator restarts or acknowledges)
Power cycle first; then service
tbl=57.r1 h=9567bd31690atbl=49.r11 h=2253563b3bbbtbl=41.r14 h=dd4f897b70eetbl=39.r14 h=dd4f897b70eetbl=51.r6 h=3b11ed9361e3review note: support check: partial - The power-cycle-then-service sequence is stated, but the passages don't say the fault clears by manual reset.
applies_toc9 drafted · lead UNO-DM-3.3/3.8/4.6/5.0-TL-PLUS-US string inverter
tbl=41.r14 h=dd4f897b70eetbl=56.r6 h=3b11ed9361e3