c1 drafted · lead FIMER PVS-166-175-TL-US A.2 Product Manual RevE
- FIMER PVS-166-175-TL-US A.2 Product Manual RevE
tbl=57.r9h=d72e0510a000
Fault codes › ABB / FIMER › FIMER PVS-166/175-TL-US
Reports string reverse current; look at PV array; do: inverter restart.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=57.r9 h=d72e0510a000The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead FIMER PVS-166-175-TL-US A.2 Product Manual RevE
tbl=57.r9 h=d72e0510a000has_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the code prefix
tbl=57.r9 h=d72e0510a000reportsc3 verified · fact String reverse current
tbl=57.r9 h=d72e0510a000tbl=50.r9 h=76f7a1a8cc76tbl=42.r8 h=e53a63aa377ctbl=40.r8 h=e53a63aa377ctbl=57.r2 h=b0925e880dadtbl=52.r2 h=b0925e880dadverified by: review-workflowverified on: 2026-10-23
affectstbl=57.r9 h=d72e0510a000tbl=50.r9 h=76f7a1a8cc76tbl=42.r8 h=e53a63aa377ctbl=40.r8 h=e53a63aa377ctbl=57.r2 h=b0925e880dadtbl=52.r2 h=b0925e880dadmitigated_byc5 drafted · lead Inverter restart
tbl=57.r9 h=d72e0510a000tbl=50.r9 h=76f7a1a8cc76tbl=42.r8 h=e53a63aa377ctbl=40.r8 h=e53a63aa377ctbl=57.r2 h=b0925e880dadtbl=52.r2 h=b0925e880dadhas_recoveryc6 drafted · lead Manual reset (operator restarts or acknowledges)
Applies under good irradiance; at low irradiance it is a normal protection. If it persists after restart, contact service.
tbl=57.r9 h=d72e0510a000tbl=50.r9 h=76f7a1a8cc76tbl=42.r8 h=e53a63aa377ctbl=40.r8 h=e53a63aa377ctbl=57.r2 h=b0925e880dadtbl=52.r2 h=b0925e880dadreview note: support check: partial - Restart under good irradiance and low-irradiance normal protection are stated, but 'manual reset' clearing is only implied by the restart instruction.
applies_toc7 drafted · lead FIMER PVS-166/175-TL-US string inverter
tbl=57.r9 h=d72e0510a000