Solar Lattice

Fault codes › Schneider Electric › Schneider Electric Conext CL125

Schneider Electric CL125 010

Code
010
Shown as
Islanding
Page
124
ID
fc:schneider-electric-conext-cl125-10
IRI
https://solarlattice.org/kb/fc/schneider-electric-conext-cl125-10
Status
active
Also known as
010, 10, Schneider Electric 010, Islanding
Category
Inverters
Class not stated
Production not stated
Clears not stated

Decoded

Reports islanding detected; look at AC cable; confirm with grid voltage measurement; do: AC connection check.

What can be behind Islanding detected

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL W015, ABB / FIMER PVS-60-TL CODE:03, ABB / FIMER PVS-60-TL W015, ABB / FIMER TRIO-20.0-27.6-TL CODE:03, ABB / FIMER UNO-DM-3.3-5.0-PLUS CODE:03, ABB / FIMER UNO-DM-3.3-5.0-PLUS W015, ABB / FIMER UNO-DM-6.0-PLUS CODE:03, ABB / FIMER UNO-DM-6.0-PLUS W015
Fronius
Fronius Galvo 108, Fronius Primo 108, Fronius Symo 108
SMA
SMA SB-US-40 401-404, SMA SB-US-41 401, SMA SB-US-41 404, SMA SBSE-US-50 401, SMA SBSE-US-50 404, SMA CORE1-US 401, SMA STP-TL-US 401, SMA STP-TL-US 404, SMA STP-X-US 401, SMA STP-X-US 404, SMA SC-CP-XT 404, SMA SC-CP-XT 0506, SMA SI-US W331, SMA SI-US W332, SMA SI-US W333, SMA SI-US W334
Yaskawa Solectria
Yaskawa Solectria XGI-1500-1MW WARN-3, Yaskawa Solectria XGI-1500-DCG WARN-3, Yaskawa Solectria XGI-1500 WARN-3

Claims

defined_in

c1 drafted · lead Conext CL125 Owners Guide 975-0793 RevA

c2 drafted · lead Conext CL125 Modbus App Note

reports

c3 drafted · lead Islanding detected

affects

c4 drafted · lead AC cable

detected_by

c5 verified · fact Grid voltage measurement

verified by: review-workflowverified on: 2026-10-23review note: support check: partial - Measuring grid voltage is a troubleshooting step, not stated as the detection method.

mitigated_by

c6 drafted · lead AC connection check

Covers breaker, disconnect and cabling; escalate to technical support if unresolved.

applies_to

c7 drafted · lead Schneider Electric Conext CL125

Data