Solar Lattice

Fault codes › ABB / FIMER › UNO-DM-6.0-TL-PLUS-US

ABB / FIMER UNO-DM-6.0-PLUS W015

Code
W015
Shown as
Island Detect.
Vendor severity
Warning
Page
123
ID
fc:abb-uno-dm-6-0-plus-us-w15
IRI
https://solarlattice.org/kb/fc/abb-uno-dm-6-0-plus-us-w15
Status
active
Also known as
W015, w15, ABB / FIMER W015, Island Detect.
Category
Inverters
Class warning drafted · lead
Production stops drafted · lead
Clears after a manual reset drafted · lead

Decoded

Reports islanding detected; do: inverter restart.

What can be behind Islanding detected

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL W015, ABB / FIMER PVS-60-TL CODE:03, ABB / FIMER PVS-60-TL W015, ABB / FIMER TRIO-20.0-27.6-TL CODE:03, ABB / FIMER UNO-DM-3.3-5.0-PLUS CODE:03, ABB / FIMER UNO-DM-3.3-5.0-PLUS W015, ABB / FIMER UNO-DM-6.0-PLUS CODE:03
Fronius
Fronius Galvo 108, Fronius Primo 108, Fronius Symo 108
SMA
SMA SB-US-40 401-404, SMA SB-US-41 401, SMA SB-US-41 404, SMA SBSE-US-50 401, SMA SBSE-US-50 404, SMA CORE1-US 401, SMA STP-TL-US 401, SMA STP-TL-US 404, SMA STP-X-US 401, SMA STP-X-US 404, SMA SC-CP-XT 404, SMA SC-CP-XT 0506, SMA SI-US W331, SMA SI-US W332, SMA SI-US W333, SMA SI-US W334
Schneider Electric
Schneider Electric CL125 010
Yaskawa Solectria
Yaskawa Solectria XGI-1500-1MW WARN-3, Yaskawa Solectria XGI-1500-DCG WARN-3, Yaskawa Solectria XGI-1500 WARN-3

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER UNO-DM-6.0-TL-PLUS-US-Q Product Manual RevB

c2 drafted · lead UNO-DM-6.0-TL-PLUS-US Product Manual RevA

has_event_class

c3 drafted · lead Warning (device continues, a condition is flagged)

from the code prefix

reports

c4 drafted · lead Islanding detected

has_production_effect

c5 drafted · lead Trip (production stops)

Inverter disconnects by anti-islanding protection

mitigated_by

c6 drafted · lead Inverter restart

has_recovery

c7 drafted · lead Manual reset (operator restarts or acknowledges)

Switch off and on; contact service if it persists

review note: support check: partial - Switch off/on is an operator restart (manual reset) but only when grid is an island grid, and the passages don't…

applies_to

c8 drafted · lead UNO-DM-6.0-TL-PLUS-US string inverter

Data