c1 drafted · lead CPS SCH350KTL-DO-US-800 User Manual Rev 2.2
- CPS SCH350KTL-DO-US-800 User Manual Rev 2.2
tbl=33.r9h=bdcffc47d65d
Fault codes › CPS › CPS SCH350KTL-DO/US-800
May indicate temperature sensor fault; look at temperature sensor; confirm with inverter display check; do: inverter restart.
tbl=33.r9 h=bdcffc47d65dThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CPS SCH350KTL-DO-US-800 User Manual Rev 2.2
tbl=33.r9 h=bdcffc47d65dhas_event_classc2 drafted · lead Warning (device continues, a condition is flagged)
from the code prefix
tbl=33.r9 h=bdcffc47d65dindicatesc3 drafted · lead Temperature sensor fault
tbl=47.r3 h=484e3858d5c4tbl=34.r4 h=293b6da87375affectsc4 drafted · lead Temperature sensor
tbl=47.r3 h=484e3858d5c4tbl=34.r4 h=293b6da87375detected_byc5 drafted · lead Inverter display check
Check the displayed temperature reading
tbl=34.r4 h=293b6da87375tbl=48.r3 h=92744a5bbe83tbl=56.r4 h=1a288429d4betbl=30.r4 h=d151d754f8e6tbl=25.r4 h=293b6da87375mitigated_byc6 drafted · lead Inverter restart
tbl=34.r4 h=293b6da87375tbl=48.r3 h=92744a5bbe83tbl=56.r4 h=1a288429d4betbl=30.r4 h=d151d754f8e6tbl=25.r4 h=293b6da87375has_recoveryc7 drafted · lead Manual reset (operator restarts or acknowledges)
Reboot by power cycling the supply; contact service if it persists
tbl=34.r4 h=293b6da87375tbl=48.r3 h=92744a5bbe83tbl=56.r4 h=1a288429d4betbl=30.r4 h=d151d754f8e6tbl=25.r4 h=293b6da87375review note: support check: partial - A manual power-cycle reboot is recommended, but the passages don't state that it clears the warning; u31 also mentions automatic elimination.
applies_toc8 drafted · lead CPS SCH350KTL-DO/US-800
tbl=33.r9 h=bdcffc47d65d