c1 drafted · lead UNO-DM-6.0-TL-PLUS-US Product Manual RevA
- UNO-DM-6.0-TL-PLUS-US Product Manual RevA
tbl=54.r1h=672af0ce9fd1
Fault codes › ABB / FIMER › UNO-DM-6.0-TL-PLUS-US
Reports inverter overtemperature; do: direct sunlight avoidance.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=54.r1 h=672af0ce9fd1The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead UNO-DM-6.0-TL-PLUS-US Product Manual RevA
tbl=54.r1 h=672af0ce9fd1reportsc2 drafted · lead Inverter overtemperature
tbl=52.r1 h=61049c341a9ftbl=59.r1 h=672af0ce9fd1tbl=54.r1 h=672af0ce9fd1tbl=43.r3 h=fa1243509e47has_event_classc3 verified · fact Warning (device continues, a condition is flagged)
tbl=52.r1 h=61049c341a9ftbl=59.r1 h=672af0ce9fd1tbl=54.r1 h=672af0ce9fd1tbl=43.r3 h=fa1243509e47sec=h262 h=ff3e2268fa02verified by: review-workflowverified on: 2026-10-23review note: support check: partial - Limitation with continued operation implies warning, but not explicitly stated.
has_production_effectc4 drafted · lead Derate (output reduced or limited)
Limit percentage is variable; the 50 percent figure is only an example
tbl=52.r1 h=61049c341a9ftbl=59.r1 h=672af0ce9fd1tbl=54.r1 h=672af0ce9fd1tbl=43.r3 h=fa1243509e47mitigated_byc5 drafted · lead Direct sunlight avoidance
tbl=52.r1 h=61049c341a9ftbl=59.r1 h=672af0ce9fd1tbl=54.r1 h=672af0ce9fd1tbl=43.r3 h=fa1243509e47has_recoveryc6 verified · fact Auto-reset (clears by itself)
Clears once the inverter cools down; contact service if it persists after ambient temperature is back in range
tbl=52.r1 h=61049c341a9ftbl=59.r1 h=672af0ce9fd1tbl=54.r1 h=672af0ce9fd1tbl=43.r3 h=fa1243509e47verified by: review-workflowverified on: 2026-10-23review note: support check: partial - Wait for cooldown and contact assistance if persists is stated, but auto-reset clearing isn't explicitly stated.
applies_toc7 drafted · lead UNO-DM-6.0-TL-PLUS-US string inverter
tbl=54.r1 h=672af0ce9fd1