Solar Lattice

Fault codes › ABB / FIMER › UNO-DM-3.3/3.8/4.6/5.0-TL-PLUS-US

ABB / FIMER UNO-DM-3.3-5.0-PLUS W024

Code
W024
Shown as
Energy data reset
Vendor severity
Warning
Page
127
ID
fc:abb-uno-dm-3-3-5-0-plus-us-w24
IRI
https://solarlattice.org/kb/fc/abb-uno-dm-3-3-5-0-plus-us-w24
Status
active
Also known as
W024, w24, ABB / FIMER W024, Energy data reset
Category
Inverters
Class warning drafted · lead
Production unaffected drafted · lead
Clears not stated

Decoded

Reports energy counter reset.

What can be behind Energy counter reset

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL W024, ABB / FIMER PVS-60-TL W024, ABB / FIMER TRIO-20.0-27.6-TL W024, ABB / FIMER UNO-DM-6.0-PLUS W024

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER UNO-DM-3.3-5.0-TL-PLUS-US-Q Product Manual RevB

c2 drafted · lead UNO-DM-3.3-5.0-TL-PLUS-US Product Manual RevA

has_event_class

c3 drafted · lead Warning (device continues, a condition is flagged)

from the code prefix

reports

c4 drafted · lead Energy counter reset

Also possible when the statistics memory card is replaced

has_production_effect

c5 drafted · lead No production effect

User-made reset, only logged in event history

applies_to

c6 drafted · lead UNO-DM-3.3/3.8/4.6/5.0-TL-PLUS-US string inverter

Data