c1 drafted · lead FIMER PVS-60-TL-US Product Manual RevB
- FIMER PVS-60-TL-US Product Manual RevB
tbl=49.r9h=c047ef4e4a9b
Fault codes › ABB / FIMER › FIMER PVS-60-TL-US
Reports internal memory error; look at inverter; do: inverter restart, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=49.r9 h=c047ef4e4a9bThe manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead FIMER PVS-60-TL-US Product Manual RevB
tbl=49.r9 h=c047ef4e4a9bhas_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the code prefix
tbl=49.r9 h=c047ef4e4a9breportsc3 drafted · lead Internal memory error
Safety memory fault inside the inverter
tbl=56.r8 h=0b9e31e8c689tbl=49.r9 h=c047ef4e4a9breview note: support check: partial - Safety memory fault is in the message, but passages only say error inside the inverter; memory error is by name only.
affectstbl=56.r8 h=0b9e31e8c689tbl=49.r9 h=c047ef4e4a9bmitigated_byc5 drafted · lead Inverter restart
tbl=56.r8 h=0b9e31e8c689tbl=49.r9 h=c047ef4e4a9bc6 drafted · lead Contact manufacturer service
If it persists after a power cycle
tbl=56.r8 h=0b9e31e8c689tbl=49.r9 h=c047ef4e4a9bhas_recoveryc7 verified · fact Manual reset (operator restarts or acknowledges)
Power cycle first; then service
tbl=56.r8 h=0b9e31e8c689tbl=49.r9 h=c047ef4e4a9bverified by: review-workflowverified on: 2026-10-23review note: support check: partial - Power cycle then contact assistance stated, but manual-reset clearing not explicit.
applies_toc8 drafted · lead FIMER PVS-60-TL-US string inverter
tbl=49.r9 h=c047ef4e4a9b