Solar Lattice

Fault codes › ABB / FIMER › FIMER PVS-166/175-TL-US

ABB / FIMER PVS-166-175-TL E027

Code
E027
Shown as
Internal error
Vendor severity
Error
Page
142
ID
fc:abb-pvs-166-175-tl-us-e27
IRI
https://solarlattice.org/kb/fc/abb-pvs-166-175-tl-us-e27
Status
active
Also known as
E027, e27, ABB / FIMER E027, Internal error
Category
Inverters
Class fault drafted · lead
Production not stated
Clears after a manual reset drafted · lead

Decoded

Reports AC voltage measurement mismatch; look at inverter; do: inverter restart, contact manufacturer service.

What can be behind AC voltage measurement mismatch

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-60-TL E027, ABB / FIMER TRIO-20.0-27.6-TL E027, ABB / FIMER UNO-DM-3.3-5.0-PLUS E027, ABB / FIMER UNO-DM-6.0-PLUS E027
SMA
SMA SC-CP-XT 6451, SMA SC-CP-XT 6452

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER PVS-166-175-TL-US A.2 Product Manual RevE

has_event_class

c2 drafted · lead Fault (device stops or needs intervention)

from the code prefix

reports

c3 drafted · lead AC voltage measurement mismatch

Redundant internal grid voltage measurements disagree

review note: support check: partial - Redundant internal grid voltage measurement error is stated, but 'disagree/mismatch' is only implied.

affects

c4 drafted · lead Inverter

mitigated_by

c5 drafted · lead Inverter restart

c6 drafted · lead Contact manufacturer service

has_recovery

c7 drafted · lead Manual reset (operator restarts or acknowledges)

Power cycle first; contact service if it persists

review note: support check: partial - Power cycle then contact service is stated, but clearing by manual reset isn't stated.

applies_to

c8 drafted · lead FIMER PVS-166/175-TL-US string inverter

Data