Solar Lattice

Fault codes › ABB / FIMER › FIMER PVS-166/175-TL-US

ABB / FIMER PVS-166-175-TL E011

Code
E011
Shown as
Ramp Fault
Vendor severity
Error
Page
140
ID
fc:abb-pvs-166-175-tl-us-e11
IRI
https://solarlattice.org/kb/fc/abb-pvs-166-175-tl-us-e11
Status
active
Also known as
E011, e11, ABB / FIMER E011, Ramp Fault
Category
Inverters
Class fault drafted · lead
Production not stated
Clears after a manual reset verified · fact

Decoded

Reports boost converter startup timeout; look at DC boost converter; do: inverter restart.

What can be behind Boost converter startup timeout

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-60-TL E011, ABB / FIMER TRIO-20.0-27.6-TL E011, ABB / FIMER UNO-DM-3.3-5.0-PLUS E011, ABB / FIMER UNO-DM-6.0-PLUS E011

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER PVS-166-175-TL-US A.2 Product Manual RevE

has_event_class

c2 drafted · lead Fault (device stops or needs intervention)

from the code prefix

reports

c3 drafted · lead Boost converter startup timeout

affects

c4 drafted · lead DC boost converter

mitigated_by

c5 drafted · lead Inverter restart

has_recovery

c6 verified · fact Manual reset (operator restarts or acknowledges)

Power cycle first; contact service if the error persists.

verified by: review-workflowverified on: 2026-10-23review note: support check: partial - Power cycle then contact service is stated, but the passages never say the error clears by manual reset.

applies_to

c7 drafted · lead FIMER PVS-166/175-TL-US string inverter

Data