Solar Lattice

Fault codes › Yaskawa Solectria › Solectria SGI 500/750XTM

Yaskawa Solectria SGI-XTM Reverse Phase

Code
Reverse Phase
Vendor severity
Informative
Page
116
ID
fc:yaskawa-solectria-sgi-500-750xtm-reversephase
IRI
https://solarlattice.org/kb/fc/yaskawa-solectria-sgi-500-750xtm-reversephase
Status
active
Also known as
Reverse Phase, reversephase, Yaskawa Solectria Reverse Phase
Category
Inverters
Class not stated
Production stops drafted · lead
Clears after a manual reset verified · fact

Decoded

Reports incorrect phase sequence; do: phase wiring correction.

What can be behind Incorrect phase sequence

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL E079, ABB / FIMER PVS-60-TL E079, ABB / FIMER UNO-DM-3.3-5.0-PLUS E079, ABB / FIMER UNO-DM-6.0-PLUS E079
Generac
Generac PWRcell Inverter 0X7722, Generac PWRcell Inverter 0X7724
SMA
SMA SC-CP-XT 1301

Claims

defined_in

c1 drafted · lead SGI 500-750XTM IOM DOCR-070506-D

reports

c2 drafted · lead Incorrect phase sequence

has_production_effect

c3 drafted · lead Trip (production stops)

has_recovery

c4 verified · fact Manual reset (operator restarts or acknowledges)

Restart after phase wiring is corrected.

verified by: review-workflowverified on: 2026-10-23

mitigated_by

c5 verified · fact Phase wiring correction

verified by: review-workflowverified on: 2026-10-23

applies_to

c6 drafted · lead Solectria SGI 500/750XTM

Data