Solar Lattice

Fault codes › SMA › Sunny Central 500CP XT-1000CP XT

SMA SC-CP-XT 1301

Code
1301
Page
35
ID
fc:sma-sunny-central-cp-xt-1301
IRI
https://solarlattice.org/kb/fc/sma-sunny-central-cp-xt-1301
Status
active
Also known as
1301, SMA 1301
Category
Inverters
Class not stated
Production not stated
Clears not stated

Decoded

Reports incorrect phase sequence; do: AC connection check, external fuse check.

What can be behind Incorrect phase sequence

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL E079, ABB / FIMER PVS-60-TL E079, ABB / FIMER UNO-DM-3.3-5.0-PLUS E079, ABB / FIMER UNO-DM-6.0-PLUS E079
Generac
Generac PWRcell Inverter 0X7722, Generac PWRcell Inverter 0X7724
Yaskawa Solectria
Yaskawa Solectria SGI-XTM Reverse Phase

Claims

defined_in

c1 drafted · lead SCCPXT-E7-WA-en-37

reports

c2 drafted · lead Incorrect phase sequence

mitigated_by

c3 drafted · lead AC connection check

Covers checking phase position of the AC connection.

c4 drafted · lead External fuse check

review note: support check: partial - Corrective measure is to make sure all fuses are switched on, which is approximately a fuse check but not specifically external.

applies_to

c5 drafted · lead Sunny Central CP XT

Data