Solar Lattice

Fault codes › Yaskawa Solectria › Solectria SGI 500/750XTM

Yaskawa Solectria SGI-XTM Low DC Power

Code
Low DC Power
Vendor severity
Informative
Page
115
ID
fc:yaskawa-solectria-sgi-500-750xtm-lowdcpower
IRI
https://solarlattice.org/kb/fc/yaskawa-solectria-sgi-500-750xtm-lowdcpower
Status
active
Also known as
Low DC Power, lowdcpower, Yaskawa Solectria Low DC Power
Category
Inverters
Class informational drafted · lead
Production stops drafted · lead
Clears by itself drafted · lead

Decoded

Reports insufficient DC input power.

What can be behind Insufficient DC input power

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

ABB / FIMER
ABB / FIMER PVS-166-175-TL E017, ABB / FIMER PVS-60-TL E017, ABB / FIMER TRIO-20.0-27.6-TL E017, ABB / FIMER UNO-DM-3.3-5.0-PLUS E017, ABB / FIMER UNO-DM-6.0-PLUS E017
Fronius
Fronius Galvo 306, Fronius Symo 306
SMA
SMA SB-US-40 3301-3303, SMA SB-US-40 9005, SMA SB-US-41 3301, SMA SB-US-41 3303, SMA SB-US-41 3901, SMA SB-US-41 3902, SMA SB-US-41 9005, SMA SBSE-US-50 29254, SMA SBSE-US-50 3302, SMA SBSE-US-50 3303, SMA SBSE-US-50 3901, SMA SBSE-US-50 3902, SMA CORE1-US 9005, SMA STP-TL-US 3301, SMA STP-TL-US 3302, SMA STP-TL-US 3303, SMA STP-TL-US 9005, SMA STP-X-US 3901, SMA STP-X-US 3902
Yaskawa Solectria
Yaskawa Solectria SGI-XTM DC Volt Low

Claims

defined_in

c1 drafted · lead SGI 500-750XTM IOM DOCR-070506-D

reports

c2 drafted · lead Insufficient DC input power

has_event_class

c3 drafted · lead Informational (status or configuration message)

has_production_effect

c4 drafted · lead Trip (production stops)

Inverter idles, not feeding in.

review note: support check: partial - Idle state waiting for power implies not feeding in, but trip classification is not stated and it's a status message.

has_recovery

c5 drafted · lead Auto-reset (clears by itself)

review note: support check: partial - Idle waiting for more power with no action needed implies it resolves itself, but auto-reset is not explicitly stated.

applies_to

c6 drafted · lead Solectria SGI 500/750XTM

Data