Solar Lattice

Fault codes › SMA › Sunny Tripower X 13-30-US (STP xx-US-50)

SMA STP-X-US 1001

Code
1001
Shown as
L / N swapped
Page
83
ID
fc:sma-stp-x-us-50-1001
IRI
https://solarlattice.org/kb/fc/sma-stp-x-us-50-1001
Status
active
Also known as
1001, SMA 1001, L / N swapped
Category
Inverters
Class not stated
Production not stated
Clears not stated

Decoded

Reports AC polarity reversed; may indicate inverter Incorrect Installation; look at AC cable; confirm with grid voltage measurement; do: AC connection check.

What can be behind AC polarity reversed

Failure modes that present as the reported condition, and the tests that tell them apart.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same condition on other equipment

Fronius
Fronius Primo 463, Fronius Symo 463
SMA
SMA SB-US-40 1001, SMA SB-US-41 1001, SMA SBSE-US-50 1001

Same code in other families

Claims

defined_in

c1 drafted · lead STPxx-US-50-BE-en-14

reports

c2 drafted · lead AC polarity reversed

indicates

c3 drafted · lead Inverter Incorrect Installation

affects

c4 drafted · lead AC cable

detected_by

c5 drafted · lead Grid voltage measurement

review note: support check: partial - The passages say to check AC voltages at the inverter connection, which is a corrective step; they don't say the…

mitigated_by

c6 drafted · lead AC connection check

Escalate to manufacturer service if the message persists after wiring check.

applies_to

c7 drafted · lead Sunny Tripower X US-50

Data