c1 drafted · lead CPS SCH275KTL-DO-US-800 V2 User Manual Rev 1.7
- CPS SCH275KTL-DO-US-800 V2 User Manual Rev 1.7
tbl=26.r5h=6c7c616f8b09
Fault codes › CPS › CPS SCH275KTL-DO/US-800
Reports DC bus overvoltage; do: inverter restart, inverter replacement.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=26.r5 h=6c7c616f8b09The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CPS SCH275KTL-DO-US-800 V2 User Manual Rev 1.7
tbl=26.r5 h=6c7c616f8b09has_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the table header
tbl=26.r5 h=6c7c616f8b09tbl=26 h=4bf40e1a4dd3reportsc3 drafted · lead DC bus overvoltage
tbl=35.r5 h=6c7c616f8b09tbl=51.r4 h=137cab5686fftbl=59.r3 h=b26eea3b7da6tbl=32.r5 h=06066af60e87tbl=26.r5 h=6c7c616f8b09tbl=34.r5 h=2a8300288ac9mitigated_byc4 drafted · lead Inverter restart
tbl=35.r5 h=6c7c616f8b09tbl=51.r4 h=137cab5686fftbl=59.r3 h=b26eea3b7da6tbl=32.r5 h=06066af60e87tbl=26.r5 h=6c7c616f8b09tbl=34.r5 h=2a8300288ac9c5 drafted · lead Inverter replacement
tbl=35.r5 h=6c7c616f8b09tbl=51.r4 h=137cab5686fftbl=59.r3 h=b26eea3b7da6tbl=32.r5 h=06066af60e87tbl=26.r5 h=6c7c616f8b09tbl=34.r5 h=2a8300288ac9has_production_effectc6 drafted · lead Trip (production stops)
tbl=35.r5 h=6c7c616f8b09tbl=26.r5 h=6c7c616f8b09tbl=34.r5 h=2a8300288ac9review note: support check: partial - The passages give no explicit stop or trip behaviour for Protect0110, only a protection-type fault with restart steps.
has_recoveryc7 drafted · lead Manual reset (operator restarts or acknowledges)
Power cycle clears normal case; replace inverter if fault persists.
tbl=35.r5 h=6c7c616f8b09tbl=51.r4 h=137cab5686fftbl=59.r3 h=b26eea3b7da6tbl=32.r5 h=06066af60e87tbl=26.r5 h=6c7c616f8b09tbl=34.r5 h=2a8300288ac9applies_toc8 drafted · lead CPS SCH275KTL-DO/US-800
tbl=26.r5 h=6c7c616f8b09