c1 drafted · lead CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=58.r4h=416427fce214
Fault codes › CPS › CPS SCA100K-T-US-480 / SCA50K-T-US-208
CPS SCA50-100K-T Protect0710
Production
not stated
Decoded
Reports internal overcurrent or overvoltage; do: contact manufacturer service.
What can be behind Internal overcurrent or overvoltage
Failure modes that present as the reported condition, and the tests that tell them apart.
Defined in
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0 — CPS (Chint Power Systems) · page 140 drafted · lead
tbl=58.r4h=416427fce214
The manufacturer's own cause and corrective text is not reproduced here.
Same condition on other equipment
Claims
defined_in
has_event_class
c2 drafted · lead Fault (device stops or needs intervention)
from the code prefix
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=58.r4h=416427fce214
reports
c3 drafted · lead Internal overcurrent or overvoltage
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=58.r4h=416427fce214
review note: support check: partial - Boost hardware overcurrent is an internal overcurrent, but overvoltage isn't mentioned.
mitigated_by
c4 drafted · lead Contact manufacturer service
Only if the alarm does not clear by itself.
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=58.r4h=416427fce214
has_recovery
c5 drafted · lead Auto-reset (clears by itself)
Expected to clear on its own within minutes; service if it persists.
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=58.r4h=416427fce214
applies_to
c6 drafted · lead CPS SCA100K-T-US-480 / SCA50K-T-US-208
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=58.r4h=416427fce214