c1 drafted · lead CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
- CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=65.r2h=609cd94f72f0
Fault codes › CPS › CPS SCA100K-T-US-480 / SCA50K-T-US-208
Reports abnormal connector state; do: inverter restart, contact manufacturer service.
Failure modes that present as the reported condition, and the tests that tell them apart.
tbl=65.r2 h=609cd94f72f0The manufacturer's own cause and corrective text is not reproduced here.
defined_inc1 drafted · lead CPS SCA100K-T-US-480 SCA50K-T-US-208 User Manual Rev 1.0
tbl=65.r2 h=609cd94f72f0has_event_classc2 drafted · lead Fault (device stops or needs intervention)
from the code prefix
tbl=65.r2 h=609cd94f72f0reportsc3 drafted · lead Abnormal connector state
tbl=65.r2 h=609cd94f72f0mitigated_byc4 verified · fact Inverter restart
tbl=65.r2 h=609cd94f72f0verified by: review-workflowverified on: 2026-10-23
c5 drafted · lead Contact manufacturer service
tbl=65.r2 h=609cd94f72f0has_production_effectc6 drafted · lead Trip (production stops)
Protection fault; restart required after the alarm clears implies the inverter stopped.
tbl=65.r2 h=609cd94f72f0tbl=48 h=9cff980c7e47review note: support check: partial - No passage states Fault5100 stops production; the Protection table covers other codes and a restart instruction only weakly implies a trip.
has_recoveryc7 drafted · lead Manual reset (operator restarts or acknowledges)
Wait for alarm to clear, then restart; service if it persists.
tbl=65.r2 h=609cd94f72f0review note: support check: partial - Row says wait for auto-clearing, then restart the inverter and call service if it persists; the classification as manual reset…
applies_toc8 drafted · lead CPS SCA100K-T-US-480 / SCA50K-T-US-208
tbl=65.r2 h=609cd94f72f0