Solar Lattice

Fault codes › ABB / FIMER › FIMER PVS-60-TL-US

ABB / FIMER PVS-60-TL E016

Code
E016
Shown as
Inverter Fail
Vendor severity
Error
Page
156
ID
fc:abb-pvs-60-tl-us-e16
IRI
https://solarlattice.org/kb/fc/abb-pvs-60-tl-us-e16
Status
active
Also known as
E016, e16, ABB / FIMER E016, Inverter Fail
Category
Inverters
Class fault drafted · lead
Production not stated
Clears after a manual reset verified · fact

Decoded

May indicate power stage fault; look at inverter bridge; do: inverter restart, contact manufacturer service.

Defined in

The manufacturer's own cause and corrective text is not reproduced here.

Same code in other families

Claims

defined_in

c1 drafted · lead FIMER PVS-60-TL-US Product Manual RevB

has_event_class

c2 drafted · lead Fault (device stops or needs intervention)

from the code prefix

indicates

c3 drafted · lead Power stage fault

review note: support check: partial - The passages describe a problem in the inverter DC/AC circuit, but do not call it a power stage fault.

affects

c4 drafted · lead Inverter bridge

mitigated_by

c5 drafted · lead Inverter restart

c6 drafted · lead Contact manufacturer service

has_recovery

c7 verified · fact Manual reset (operator restarts or acknowledges)

Power cycle first; contact service if the fault persists afterwards.

verified by: review-workflowverified on: 2026-10-23review note: support check: partial - Power cycle then contact service is stated, but clearing by manual reset is not stated.

applies_to

c8 drafted · lead FIMER PVS-60-TL-US string inverter

Data